They are made by Ergo Grip, readily available, I've found them to be very cumbersome to shoot with personally and I'm not a fan. To each their own.
Printable View
They are made by Ergo Grip, readily available, I've found them to be very cumbersome to shoot with personally and I'm not a fan. To each their own.
Ok smchop. It's been a week and a half. We need results.....
Second that[Beer]Quote:
Originally Posted by KS63
Quote:
Originally Posted by KS63
Ease up man, his gun range only opens every 18 days.
I'm surprised not more of you have snagged one already and posted results?
One thing I found is reports that the samson rails get to be off centered. Doesn't hit barrel so I think cosmetic. Conflicting reports, several I see say it's been happening on AR's too. Some say it's just the method the thing is screwed onto the thing. Sounds like plenty of 3rd parties working on a different dedicated rail for it that would mount different.
Put a deposit down, now the waiting game.
The Samson rail I put on my 9" 300BLK build is a bit wonky IMHO but it's all I could lay hands on that was a right fit for a QD mount can. Nothing significant, and no movement so far, just seems a bit off center vertically. I don't mount optics to the fore rail so meh.Quote:
Originally Posted by fitz19d
First post. I purchased a RPR 2 weeks ago in.243. 300 rounds thru it and I am pleased with its performance. Accuracy has been 1/2 to3 /4 moa out to 600 yds. for 5 shot groups. I am using Lapua, Berger 108's, hornady 105's, H4831(seems to like 42.0-42.2 gr.), CCI LR mag primers. velocities 2940 fps. Atlas bipod, rear bag,xtreme hardcore gear hybrid muzzle break. I have shot groups with and without the break, firm hold or almost free recoil,loading bipod or not and it shoots about the same. Most satisfying 5 shot group 2.9 inches at 600 followed up by 4.0 inches. Hope this info is useful. Have a great day.
I've got one in 243 as well. I've only been able to shoot about 30 rounds so far. I screwed up my measurement to the lands so the bullets were all jammed, apparently not something this gun prefers. I will say this though, I had several bullseyes, just couldn't get it to stay there. It's really for my lady but, I'm overall very pleased so far. I know it'll shoot once I get my loads together. Definitely worth the money.
I've seen a few places reporting the .243 barrels have issues stringing around a bit with more than a couple rounds. 6.5CM sounds pretty hot OOB, and I havnt heard much on the .308. (Preordered a .308 and will try 6.5 later, though pissed when I found out diff. length handguards).
One guy with a .243 on a forum swapped it out with a custom made 6mm or something and was getting absolutely sick 1/4 MOA out of it. Dont have link handy sorry.
If it's the same one I'm thinking of, Josh Kunz from Patriot Valley Arms spun up a 6 dasher barrel for a guy, and it's a full fledged hammer, and he now has the programming set up to punch out prefits for around $650ishQuote:
Originally Posted by fitz19d