Post a picture of your latest purchase

Printable View

Show 40 post(s) from this thread on one page

10-26-2011, 13:49
rockhound

Just Broke ground yesterday on the new garage/shop
24x36
2 10x8x24 carports
colors are different than drawings, green trims with taupe walls

http://photobucket.com/POLEBARN
10-26-2011, 15:02
Lex_Luthor

Ranger T Series
10-26-2011, 15:29
Ridge

Lee Classic Turret Press and Frankford Arsenal stand

http://i17.photobucket.com/albums/b1...d/IMAG0375.jpg
11-02-2011, 21:56
hghclsswhitetrsh

http://i1036.photobucket.com/albums/...4/IMAG0051.jpg
A new redfield scope for my AR-15 3x9-50mm

http://i1036.photobucket.com/albums/...4/IMAG0056.jpg
I just picked this up tonight from Tinelement's co-worker.
11-02-2011, 22:01
Fentonite

Quote:

Originally Posted by rockhound

Just Broke ground yesterday on the new garage/shop
24x36
2 10x8x24 carports
colors are different than drawings, green trims with taupe walls

http://photobucket.com/POLEBARN

Very cool. You should start a dedicated thread, and show pics of the progress as it comes along.
11-02-2011, 22:02
Squeeze

Quote:

Originally Posted by Ridge

Lee Classic Turret Press and Frankford Arsenal stand

http://i17.photobucket.com/albums/b1...d/IMAG0375.jpg

I love my Lee Classic Turret Press. In fact, all my dies are Lee also. Great product at a great price.
11-02-2011, 22:04
rockhound

Thanks,

i will consider that.

the excavator dug the foundation holes already. hard to take photos though we covered it all up for the snow. wanted to keep the foundation dry and warm.

the snow fall here in Bailey has been so light the last few years we were hoping to have a similar weather pattern this year. the one year i need to have the weather hold off another month and instead here it is.

Oh well, we may wind up pouring the slab after the building is up.
11-03-2011, 15:38
SouthPaw

Four of these for the truck:

http://imageplay.net/img/m7Gbd234159/kumho.jpg

And one of these for my 2006 CBR 1000RR:

http://imageplay.net/img/m7Gbd234160/evo.jpg
05-19-2012, 07:36
Wolfen

just got off of forum and replaced all internals(springs and other stuff) love it. Series 70 nickel is just awesome

http://i12.photobucket.com/albums/a2...11series70.jpg
05-19-2012, 20:41
asmo

So the gun isn't new but the paint job is - supposed to be an ATACs pattern but it came out really green. The knife is new; and it is the extent of my painting skills.

http://caliban.dreamscope.com/chance...s/IMG_3229.jpg

After going through the hydro dipping process I don't think I will do it again. Not worth all the hassle and it really doesn't come out that well on non-smooth surfaces. Live and learn.
05-19-2012, 21:09
02ducky

Is that an EESE?
05-19-2012, 21:16
KevDen2005

I think that might be a Kabar
05-19-2012, 21:53
TriggerHappy

Aimpoint R1, I'll post pics once I get all the Krylon off and maybe once it gets duracoat.
05-19-2012, 22:24
blacklabel

http://www.freewebs.com/trf18/sailor-jerry-rum.jpg

Cheap and delicious.
05-19-2012, 22:39
Jer

Quote:

Originally Posted by dropped_71chevy

http://www.freewebs.com/trf18/sailor-jerry-rum.jpg

Cheap and delicious.

Just the way I like my women. Pisses the wife off. lulz
05-19-2012, 22:41
blacklabel

Quote:

Originally Posted by Jer

Just the way I like my women. Pisses the wife off. lulz

Haha, fortunately my lade likes it too.
05-20-2012, 03:23
asmo

Quote:

Originally Posted by 02ducky

Is that an EESE?

Kabar BK-2.
05-20-2012, 11:31
Squeeze

Bullet

He's an awesome little Aussie, about 14 weeks old. Smart as a whip and very loyal. His original owner had 5 adult Aussies who all got killed by coyotes out by Hudson. He told me he couldn't bear to see this little guy get killed, so for 2 boxes of .308 ammo...I got to take him home. Also he asked that I come up and help him take care of his coyote problem. I couldn't pass it up.

So here's "Bullet", my new best pal:

http://i1094.photobucket.com/albums/...Pro/Bullet.jpg
05-20-2012, 11:37
lex137

That's nice looking dog! Love my dog, but he has been pissing on my carpet and hes not a puppy anymore!!! Sounds like a lot of fun going to shoot coyotes.
05-20-2012, 19:15
car-15

put a new tire on the hog today.
http://i223.photobucket.com/albums/d...1/5ea50da1.jpg
05-20-2012, 19:18
DSB OUTDOORS

Quote:

Originally Posted by car-15

put a new tire on the hog today.

What that run ya? I need some for my bike. Thanks!
05-20-2012, 19:29
car-15

Quote:

Originally Posted by DSB OUTDOORS

What that run ya? I need some for my bike. Thanks!

$186.02 shipped, and I put it on myself, the dealer wanted $279.xx +tax for the tire and $85.00 to put it on for atotal of $384.xx I told them to pound sand and did it myself and saved almost $200 bucks.
http://www.americanmototire.com/cata...oducts_id=1508
got the front also and I just finished putting it on, it was $145.00 I did not even price it from the stealer.
http://www.americanmototire.com/cata...oducts_id=1476
http://i223.photobucket.com/albums/d...1/ba07b6e0.jpg
05-20-2012, 19:38
DSB OUTDOORS

Quote:

Originally Posted by car-15

$186.02 shipped, and I put it on myself, the dealer wanted $279.xx +tax for the tire and $85.00 to put it on for atotal of $384.xx I told them to pound sand and did it myself and saved almost $200 bucks.
http://www.americanmototire.com/cata...oducts_id=1508

Thanks!! Good to know! http://www.clicksmilies.com/auswahl/ernaehrung004.gif
05-20-2012, 19:50
Danimal

Tires, top end rebuild, fork rebuild, 25mm rear axle conversion, 50 watt stator, lights package and probably some other crap that I am drinking so I forget how much it all cost.

http://i656.photobucket.com/albums/u...d/DSCN3734.jpg
05-20-2012, 20:39
Danimal

Quote:

Originally Posted by car-15

$186.02 shipped, and I put it on myself, the dealer wanted $279.xx +tax for the tire and $85.00 to put it on for atotal of $384.xx I told them to pound sand and did it myself and saved almost $200 bucks.
http://www.americanmototire.com/cata...oducts_id=1508
got the front also and I just finished putting it on, it was $145.00 I did not even price it from the stealer.

Do you have a trick for street bike tires? I have tried several times to get those on with a 0% success rate and I always end up going into a dealer to get them mounted and balanced. Dirt bike, no problem, but it seems like street bike tires are like an inch too small in diameter to mount myself.
05-20-2012, 21:32
car-15

Quote:

Originally Posted by Danimal

Do you have a trick for street bike tires? I have tried several times to get those on with a 0% success rate and I always end up going into a dealer to get them mounted and balanced. Dirt bike, no problem, but it seems like street bike tires are like an inch too small in diameter to mount myself.

I got a cheap bead breaker from china freight to break the seal, then I just mix dish soap with water, spray the bead and use some cheap rim protectors I've picked up at bike shops, and two tire iron's, for mount and dismount, I have changed countless sets for me and my friends over the years. for balancing I use a 1/4 inch ratchet extension a set of jack stands, and some sticky weights.
05-21-2012, 12:03
King

Quote:

Originally Posted by Danimal

Tires, top end rebuild, fork rebuild, 25mm rear axle conversion, 50 watt stator, lights package and probably some other crap that I am drinking so I forget how much it all cost.

http://i656.photobucket.com/albums/u...d/DSCN3734.jpg

Thats sick, a 2-stroke Motard! Just curious, how much did that cost to convert
05-21-2012, 12:24
Danimal

Quote:

Originally Posted by Trigg3r Happy

Thats sick, a 2-stroke Motard! Just curious, how much did that cost to convert

I went the expensive route, mostly because my bike needed work anyway. I am in the process of replacing the rear suspension with parts from an 03. I chose to do this because the swingarm is lighter and stronger than my 01, and the 03 uses 240 mm rear brakes and a 25mm axle. All in all I would say it cost me about $1500 because I bought used parts where I could, but if you do not need the axle swap, top end rebuild, fork rebuild or new plastics, I would say about 900 - 1000 for wheels, tires, and electrical if you shop around.
05-21-2012, 17:49
Half Live

Man all this talk of tires is reminding me I need 2 new tires on my car, 4 for my bronco and possibly 2 for my bike :(
05-21-2012, 20:59
car-15

picked up a od g23 from another board member today.
http://i223.photobucket.com/albums/d...1/6ef0fe5a.jpg
http://i223.photobucket.com/albums/d...1/de619f18.jpg
05-22-2012, 00:31
Squeeze

I have this same G23. I love it.

Quote:

Originally Posted by car-15

picked up a od g23 from another board member today.
http://i223.photobucket.com/albums/d...1/6ef0fe5a.jpg
http://i223.photobucket.com/albums/d...1/de619f18.jpg
05-22-2012, 20:27
Sixgun

MY 1st AK
AK-107cr 7.62x 39
http://www.hunt101.com/data/500/GetAttachment16.jpg
05-25-2012, 15:28
lex137

Got a new CCW after selling my XD sc, Kahr CM9 sweet gun!!! Was work getting it broke in cleaning every thing,racking the slide 500+ times, then taking it apart again to clean again, working the slide release so it's not so stiff, and lastly the fun part going to put 200 rd down the range!!!! Only bad part only comes with one mag and cardboard box.

http://i1088.photobucket.com/albums/...7/SAM_3668.jpg

http://i1088.photobucket.com/albums/...7/SAM_3669.jpg
05-25-2012, 17:19
hghclsswhitetrsh

http://i1036.photobucket.com/albums/...4/IMAG0291.jpg
http://i1036.photobucket.com/albums/...4/IMAG0292.jpg
http://i1036.photobucket.com/albums/...4/IMAG0293.jpg

Picked this baby up fom a dude off Craigslist.
05-25-2012, 17:20
02ducky

Wow nice score, Merry Christmas to you!
05-26-2012, 16:27
opie011

http://i435.photobucket.com/albums/q...1/26d8e809.jpg
05-26-2012, 17:16
Half Live

http://i7.photobucket.com/albums/y29...-53-06_603.jpg
05-26-2012, 17:23
Sharpienads

Bailey's, Guinness, JAMESON!!! What time should I be over?
05-26-2012, 17:41
Half Live

Quote:

Originally Posted by Sharpienads

Bailey's, Guinness, JAMESON!!! What time should I be over?

lol
05-26-2012, 17:55
Atrain1

My 388 Stroker for my 1979 Oldsmobile Cutlass.

http://i1127.photobucket.com/albums/...388stroker.jpgMore like latest build but everything on it are the latest purchases that I have made. It is at the speed shop waiting to run on the dyno, I am hoping for at least 550 HP at the crank.

Show 40 post(s) from this thread on one page