I threw 500 pcs of 6CM brass in the stainless media tumbler and converted 1,000 pcs of 223 into 300 Whisper/Blackout for a friend.
Printable View
I threw 500 pcs of 6CM brass in the stainless media tumbler and converted 1,000 pcs of 223 into 300 Whisper/Blackout for a friend.
Decapped and sized a couple hundred 40S&W
Poured 3/4 of a coffee can worth of 230 gr LRN boolits! Woot!
First, I looked at my supplies of Varget and H4350 and got angry. Where in blue blazes is it all going? You know they're making more but you never see a single pound for sale.
After some deep breathing exercises and a double scotch, I decapped, cleaned and sized my .260 match brass.
I stared at my Varget, not wanting to open it just yet. Think I'll use up the 4895 first.
Where do you live, Ray? Do you have an alarm system?
Lol. I stumbled on some powder locally and bought all I could afford. Even a blind pig finds a truffle every now and then.Quote:
Originally Posted by Tim K
Finally got the first piece of equipment.... Besides the super heavy duty table of course:
http://sphotos-a.xx.fbcdn.net/hphoto...05921336_n.jpg
Last night, I pulled 300 bullets. Today, I resized 300 pieces of Lapua brass. Tonight, I will be refilling the 300 pieces of Lapua brass with the powder I took from the cartridges and reseating the 300 bullets I pulled from them...
Ya, I'm Fn mad. I found some of the rounds would fit, some wouldn't. Two different guns, two different chamber dimensions. They would all fit the loose chamber. Complete fucking rookie mistake and I know better. Winchesher for the PSS and Lapua for the AICS from now on.
Managed to swipe a few hundred pieces of .30-06 brass from a certain old codger up in Conifer. Tumbling 70 years worth of grime off them now.
Lake City '43!!!