So I shoot a lot of 9mm and 308 below is my shopping list. Does it look like it will do the job.
XL 650
RT 1500 and dies
Case Feeder
Strong mount
Bullet Tray
Powder Check
Am I missing anything?
Printable View
So I shoot a lot of 9mm and 308 below is my shopping list. Does it look like it will do the job.
XL 650
RT 1500 and dies
Case Feeder
Strong mount
Bullet Tray
Powder Check
Am I missing anything?
Check book.
Caliber conversions.
Lots of components.
I'm almost there as well... So I'm interested.
Case feeder?
Roller arm?
Audible powder alarm?
Side not what step are you using the trimmer on?
Hope I'm not jacking your thread... Tell me to GTFO I won't be offended.
I'm going to use the trimmer on case prep only. Decap, swage, resize/trim is my idea. I use a lot a military brass
Spare parts kit.
Dillon XL650 with case feed in 9mm
large rifle case feed plate
.308-30-06 conversion kit
9mm die set carbide
.308 die set, in carbide if possible
3 spare tool heads (buy 3, cheaper) You will use them.
RT1500 Trimmer
.308 Trimmer Die
Super Swage 600 (XL650 does not swage, 1050 does)
XL650 Spare Parts Kit
Strong Mount (???)
Bullet Tray (???)
Large bank account.
About $2300.
This will start, others will chime in.
How much do you shoot in a week? What press/presses where you previously using?
You're not swaging on a 650.Quote:
Originally Posted by Lurch
Quote:
Originally Posted by Lurch
Extra tool heads / caliber conversions, Primer tubes, . Buy Once, Cry Once.
http://www.dillonprecision.com/#/con...0_Quick_Change
http://www.dillonprecision.com/#/con...Conversion_Kit
http://www.dillonprecision.com/#/con..._pick_up_tubes
http://www.dillonprecision.com/#/con..._pick_up_tubes
Or this unit
http://www.dillonprecision.com/#/con...Small__2_Large
http://www.dillonprecision.com/#/con...e_Small_Pistol
http://www.dillonprecision.com/#/con...te_Large_Rifle
http://www.dillonprecision.com/#/con...n_Powder_Check
http://www.dillonprecision.com/#/con...fle_Case_Gages
http://www.dillonprecision.com/#/con...pare_Parts_Kit