Any one in the springs good with transmissions? Ford C4 issue.

Printable View

10-28-2014, 21:36
CareyH

Any one in the springs good with transmissions? Ford C4 issue.

I have a bit of experience with C4 transmissions. I have rebuilt a few without any issues. I am running into an issue with one my brother bought. Its a PA pro comp C4 with transbrake, fully rollerized. We pulled it apart to put new clutches, steels and intermediate band in. Pulled it apart everything looked good, the old clutches and steels has a few he spots but nothing crazy. So we replaced the clutches steels and band. but when I bolt the pump up the input shaft will not turn. if I loosen the pump up it turns fine. I have pulled it apart a few times and made sure all thrust washers are in place( I used Vaseline to hold them in place) everything looks right, but something is binding it up and I cant figure out what.

Any Ideas? If anyone know someone in the springs that could help that would be awesome.
10-29-2014, 21:13
CareyH

dang, I guess I am on my own :(
10-29-2014, 21:28
Irving

You could ask Zetnick.
10-29-2014, 22:16
Great-Kazoo

Quote:

Originally Posted by Irving

You could ask Zetnick.

PM the bobster
10-30-2014, 10:33
CareyH

I will shoot a PM
10-30-2014, 17:29
2XS

Everything turns free until you bolt the pump up ? What is the history of the trans run low on fluid just a freshen up. Sounds like there is an issue with pump to me. Doesn't the procomp have lifetime warranty through PA ? I assume he isn't the original owner ?
10-30-2014, 17:44
2XS

You may also want to check clickclickracing.com there are a lot of smart guys over there that can help chances are better then not.
10-30-2014, 17:49
GunsRBadMMMMKay

One we rebuilt in school did that, I think the shaft was bent ever so slightly iirc.
10-30-2014, 18:58
zteknik

Got your pm,and sent one back.
I'll take a look see.I'm no tranny expert but it could be something simple.
10-30-2014, 20:51
Great-Kazoo

Quote:

Originally Posted by zteknik

Got your pm,and sent one back.
I'll take a look see.I'm no tranny expert but it could be something simple.

So your trips to NYC were for shopping only ?
10-31-2014, 21:46
zteknik

Quote:

Originally Posted by Great-Kazoo

So your trips to NYC were for shopping only ?

[facepalm]...
Never been to that side of the Village[ROFL3]
11-04-2014, 18:16
boomerhc9

1 Attachment(s)

Attachment 51791
11-04-2014, 20:32
zteknik

Quote:

Originally Posted by boomerhc9

Attachment 51791

Don't you have a waiter oil change to do???[ROFL3]
11-04-2014, 22:48
boomerhc9

If I do, they are going to be waiting all night! [Beer]
11-04-2014, 22:50
boomerhc9

on a side note, I always think of that picture when the service writers call it a stall, instead of a bay.
11-04-2014, 23:02
zteknik

Quote:

Originally Posted by boomerhc9

on a side note, I always think of that picture when the service writers call it a stall, instead of a bay.

Yup,that does come in to mind now that I think about it.