I got a 2006 dodge ram 1500 5.7 hemi and a pulley is shredded. I don't know what this one is called
Printable View
I got a 2006 dodge ram 1500 5.7 hemi and a pulley is shredded. I don't know what this one is called
Idler pulley, fixed.
Just show that pic to the NAPA guy.
Are you broke down somewhere, need a hand?
I think it should just bolt on and off once i get the belt off. Am I right?
https://www.rockauto.com/catalog/x,c...,parttype,6956
https://www.rockauto.com/catalog/mor...372&cc=1432338
Looks like 89007 is the flat steel one.
https://www.rockauto.com/info/Dayco/89007FRO.jpg
It should, it looks like the idler pulley, the tensioner is the one to the right in the picture.
Replace your serpentine belt at the same time, it is showing some damage. Save the old one and store it in your truck, it will make a good emergency get your butt home spare belt.
Looks like the OEM part is 68058372AA
http://www.wermopar.com/dodge/ram-15...e=idler-pulley
New OEM part appears to be nylon.
I'd replace the tensioner and belt at the same time.
Looks like there is also a lower.
Agree with earplug, replace all three pulleys and the belt, cheap insurance.
If you're still not sure try posting the pic on dodgetalk.com. I've used the info from guys at the forum before and it's always been sound.
What do you call it?
Fooked
Wow that thing was gone
Ahhh! Got it all fixed feels good. Only took maybe 20minutes. Hardest part was doing it in the dark and trying to get my belt back on