A Denver PD officer was nice enough to let me know that my left hand turn sigs are not working, he really did just let me know! I changed the bulbs and fuses, there are no flashers that I can find. I'm at the end of my rope here. Any tips?
Printable View
A Denver PD officer was nice enough to let me know that my left hand turn sigs are not working, he really did just let me know! I changed the bulbs and fuses, there are no flashers that I can find. I'm at the end of my rope here. Any tips?
buy a ford
I'm just kidding! Talk to Zteknic. he is pretty good at electrical!
Id rather walk, or drive a toyota!Quote:
Originally Posted by boomerhc9
Does it flash with hazards?
Get the owners manual out of the glove box,and look up the location of the turn signal relay, or get a service / repair manual for your truck.
Haynes even has online downloadable ones.
Thanks Kyle.Quote:
Originally Posted by boomerhc9
Could be a couple of things.
Are both the front and back signals not working? Or just one not working?
Could be a multifunction switch, or even a bad bulb socket.
It may also have separate fuses for left and right turn signals.
No it does notQuote:
Originally Posted by Wulf202
From what I have found it looks like it's a $400 part, that has to be programmed for mu truck. SMHQuote:
Originally Posted by zteknik
That is chevy for ya. Should have bought a Ford.
heheh.
Need to see a diagram. Some late GM's have relays one for each side along with a fuse for each side. Since it does not work with the signal and the 4-ways. Just looked and there is a fuse for each side. Start there.
Unfortunately some of those modules have to be dealer programed- proprietary software that is not released to general shops.Quote:
Originally Posted by Bitter Clinger
Fords are like that as well.
Here's a diagram of the turn signal/ hazard light circuit. Most likely the BCM took a crap on you, but can't be sure till you check voltage, ground, and continuity of particular circuits. Hope this helps a little..
Attachment 55391
Must be low on blinker fluid. There is a sale going on at NAPA.
if not bulb or fuse then it looks like some digging around as others have said
Thanks for the help guys. Im 99% sure its the bcm. Last thing to check is if there is a short in the wiring. I'm not paying $400 for a F'ing turn signal. I'll stick my arm out the window, it's free.