Printable View
Howdy all,
I am looking at having stickers made for corn hole games. Probably 10 to start. CO flag. 24"x48" with a hole cut out. UV protected for extended outdoor use.
http://pic20.picturetrail.com/VOL136.../413950645.jpg
Anyone on the board do this?
TIA!
I thought Mazin might have done stickers. Don't know if he did anything that large. I've got a neighbor with a large format printer (about the size of a tanning bed), but I don't know if he does stickers. I'll ask.
I could do this, but will have to order material and it would be layered for each color, not printed in different colors. (We have a cutter, not a printer)
Nah, ain't touchin' this.....Quote:
Originally Posted by Ah Pook
I know someone that makes corn hole boards like these, but he paints them. We had him make two sets for our company picnic last year. I can get you contact info if you're interested.
I think this is him: https://denver.craigslist.org/sgd/d/...630333432.html
Yes sir any length by up to 32" wide.Quote:
Originally Posted by Irving
^this 100% I'm In the same boat I dont have solubale printer but a vinyl cutter.Quote:
Originally Posted by 00tec
Would have to order some oracle 651 (5-7 year outdoor life) in all the colors and then apply on color at a time. Shouldn't be too much of a thickness difference layering so I wouldnt worry about the vinyl affecting game play but I couldn't guarantee it wouldnt ether. We will Need to know dimensions and count to figure out how much vinyl to order.
Hit up Otec first because I'm not jacking anyones gig.
Using cheap vinyl as a stencil and painting the board may be a better option. As Mazin said, the layers could impact how the bags slide.
Come on, RD! Do your worst. [LOL]Quote:
Originally Posted by rondog
I am not a painter. I had these painted by a local but wasn't too impressed. I was going to change the design to a CO flag colors star burst but I am still not a painter.
http://pic20.picturetrail.com/VOL136.../413950846.jpg
How smooth would a layered decal be? Price per decal? Feel free to PM.
Per the ACO regs:
https://americancornhole.com/aco-off...t-of-cornhole/Quote:
7. The playing surface should be finished – sanded to a very smooth texture. There should be little to no blemishes in the wood surface that may disrupt or distort play.
8. The playing surface can be painted with a high gloss latex paint or varnish. The surface should allow bags to slide when thrown, but not be so slippery that the bags slide back down the platform.
Not sure how serious the folks are about Cornhole, but I imagine that repeated strikes would result in a sticker peeling enough to disrupt play.
Have a decal on your vehicle's glass? That, per layer. 3 magpul stickers thick at points. I agree that repeated impacts or slides across an edge will pull the vinyl up. Would be the same as placing a decal in the path of a windshield wiper.Quote:
Originally Posted by Ah Pook
Yep and ether rolled very very thin but it would still leave a small texture (paint would still be layering so there would be differences in height like vinyl just not as pronounced) or you can spray it but with latex your going to have a texture no matter what. My next question would be do that have "preferred paint" or is it not that stringent.Quote:
Originally Posted by 00tec
Honestly I think your gonna need a full decal from a soluble printer (normal decal like a magpul) anything else will give you differences even ever so slight on the game surface.
If I were to do this right, I would decal stencil and spray, then a layer or 2 of clear, sand, and clear again.Quote:
Originally Posted by Mazin
Absolutely, this is a roll job with vinyl stencil and you can feel the star on the top as well as the over all texture change and a general light tack feeling.Quote:
Originally Posted by 00tec
http://i67.tinypic.com/2uhvipj.jpg
http://i66.tinypic.com/2dv5p46.jpg