Well, the washing machine went belly-up. It's very old, I don't want to repair.
Any suggestions/recommendations/experience with good brands/models is appreciated.
Bounding the problem, don't care if front or top load. Don't need anything fancy, like these $2K computerized-launch-system washers.
Never bought anything other than the cheap top load ones you see everywhere.
If you go to Lowe?s, they often have a few that are about half price due to dents or other cosmetic issues. May want to start your search there or Craigslist for a used one if you would prefer to save money.
Maytag front loader with 'Fresh Hold'. Made in 'Merica. Had it for a several years now and it still smells fresh inside. No mold or stinky smells. Can't say that for the LG it replaced.
https://www.maytag.com/washers-and-d...resh-hold.html
https://www.bestbuy.com/site/maytag-...?skuId=6313665
I got a Whirlpool front loader. Had it for 13 years. Still works good... it is called a Sport Duet I bought in 2007.
Good suggestions, thanks!
Just died on you? I had a few weeks warning before my clothes washer went out. Packing her bags and saying i'm leaving, was the first hint ;)
Nothing worse than having your clothes washer and dishwasher going out at the same time.
Telll me about it. I mention. 1 year she asked for a new dishwasher for Christmas. SO What, if she didn't speak english. She asked for one, didn't specify what kind. Hell i could of got an oyrish one.Quote:
Originally Posted by Gman
NSFW, or the thin skinned.
https://www.youtube.com/watch?v=boO4RowROiw
I have that scene memorized. The Irish did see some serious discrimination.
This was timely since March is Irish American Heritage Month.
and last month was black history monthQuote:
Originally Posted by Gman
So................. it looks like the black irish are real ;)
When our 20-something-year-old washer and dryer started giving up the ghost, we replaced with Kenmore Elite HE front loaders. They've been flawlees for about 6 years now.
Too bad Sears is barely hanging on. Kenmore isn't what it used to be...for a while now.
I got a GE 4.2 cu ft top loader with agitator at Home Depot last fall. I chose it because it's a plain Jane old school type washer. Choose type of load (whites, colors) and water temp and level, hit start. You can also open the lid during operation (not during spin) if you need to toss something in. Seems to work great though it's a little noisy. I bought it as a pair with the matching dryer and they were $373 each.
I hate these damn new HE washers with impellers instead of agitators. I've done loads where some of the clothes didn't even get wet. This cheap one will fill that tub to the very top if that's what you want.
Another thing I like is no computer boards (or very little computer control). All old school mechanical dials. And, the hot water isn't tempered with cold. When you choose "Hot", that's what you get. Great for cleaning whites.
With all the choices out there it's a PITA to pick one. I chose mostly on the $$ and the reviews.
ETA: I just looked at the price...$566 now. Black Friday deal saved me a bunch of money. Plus the kid in the appliance dept gave me an extra $50 off the pair because I told him I'd pick them up at the store rather than have them delivered.
My 2005 LG front load I got is still running strong. Big dent on side from forklift had it discounted to $300.
It's a tool in a closet who cares what it looks like.
I have a Frigidaire FS series washer and dryer which I purchased from 2008 (when i moved to thornton). Got 150 water rebate, and using it since.
Still working great, but I had to replace few parts:
-Dryer door latch Door Latch for Electrolux Frigidaire Dryer 5366021400 131658800
-Washer Door Latch Strike Frigidaire Part 131763302
-Frigidaire Electrolux 134515300 Bellow 134515300-FR
I had to replace the bellow , because I bought those stupid organic natural green detergent from Costco. Used that, and mold was building up. I used bleach and brush, and it would not disappear. I even let bleach sit on it for a day, and area was getting bigger and bigger over time. I got so grossed out and bought a new bellow.
Washer door latch strike is known part which breaks on Fridaire washer. It was fairly urgent, and bought it from Appliance factory outlet part store on 74th and I-25.
Dryer latch also broke, but bought that on ebay for under $5.
Washer does make some noise (my guess is lints) but still running strong. Planning to replace it on my 15th year or earlier.
If I pay less taxes this year (maybe even get refund), i might think of buying a new washer dryer set. If so, my 1st choice to look at would be LG.
Look up Speed Queen Washers. They are expensive, but they have a 25 year warranty. They are a company that makes machines for laundromats and other industrial applications. A few years ago they learned people would pay more (their basic washers are 2 or 3 times the price of the basic model at your local hardware store) if it meant the washer lasted forever, so they now make consumer models.
Bosch or Miele..
Picked up a good, used, Maytag on Craigslist. Less than 2-years old for <$350, price new >$750.
[emoji106]
Thanks everyone for the input. It helped a lot. First load successfully launched, no leaks.
My washer is not spinning fast enough to get all the water out.
I even un plugged and plugged next day.
It has been about almost 12 years.
I might have to buy a new one.
Any front loading brand you guys recommend?,
Any brand and model to avoid?
I will most likely get it at Home Depot or Lowes.
I bought a pair of samguns in 2007, and they’re still going strong.
You might try taking the back panel off to access the discharge hose at the pump. Sometimes accumulated stuff like string, socks, and golf balls get stuck in the discharge pump or hose. Simple fix, save $$.
jk about the golf balls.
I hope your othe balls weren't caught in the spin cycle....Quote:
Originally Posted by Hummer
Never owned a front loader... friends of mine love their Samsung's.
Ouch, but no.Quote:
Originally Posted by Duman
I'm still using a dishwasher I bought for the cabin 15 years ago off Craigslist for $35. Rotated the front panel, looks good, works well.Quote:
Originally Posted by Duman
Also off Craigslist I bought a new high end Kenmore Elite dishwasher for 1/3 the $1500 new cost. Great machine now after 7 years. Buying used appliances can be a good deal.
I'd look at Miele. Our Miele S7 vacuums have been excellent.Quote:
Originally Posted by def90
Still recommend Maytag.Quote:
Originally Posted by MrPrena
Our prior LG had mold issues and stunk to high heaven and would not clean up effectively (which is why we replaced with Maytag).
Samsung had problems with the top load washers coming apart during the spin cycle. There was a recall to address it. Have no experience with the front loaders.
Thanks.
Many big box stores are backordered on affordable washer dryer set. It is usually one or the others are back ordered.
I might need to get whatever they have a complete set or buy different brand of each.
It reminds me of when we were looking for a TV month back. This stimulus check is really driving demand of durables.
Suppressed production related to Covid-19 certainly doesn't help with availability.
Why do you need a matching set? I have a 2005 dented LG front loader that was cheaper than the cheapest top loader, and paired it with an Inglis dryer. I think the pair was just under $600. If one die, I'll replace what died, not both with the cheapest I can find.
Its a tool, not a fashion accessory
If that's the case, why do they offer them in different finishes?
The same could be said of firearms.
Because there are shallow people who care more about form than function?
Sometimes, people can afford to have matching appliances completely unrelated to their personal character.
...and the finish doesn't change the form or the function, as you've experienced with your scratch & dent.