Threading AK barrel

Printable View

08-29-2021, 12:10
XXFattyHunterXX

Threading AK barrel

Anyone know where I can go to get my zpap 85 rethreaded to 1/2x28? It's 26mm currently.
I'd rather have it rethread as I would like to run a suppressor rather than using an adapter. Thankshttps://uploads.tapatalk-cdn.com/202...1e8359ff84.jpg
08-29-2021, 15:55
Great-Kazoo

Well. if you want to run a HALO.
I have the correct, Gemtec, adapter for that unit, ran it on my SLR 106F for a few.
08-29-2021, 15:57
XXFattyHunterXX

I plan running an AAC can, I should've clarify. They have adapters from 26mm to 1/2x28 but not sure if that's recommended?
08-29-2021, 17:41
The Rat

Halcyon Defense did my last AK's cut and rethread and I am very happy with the results.
08-29-2021, 21:09
XXFattyHunterXX

Quote:

Originally Posted by The Rat

Halcyon Defense did my last AK's cut and rethread and I am very happy with the results.

Thank you, I am hoping to see if there's anyone local that can do this.
08-30-2021, 07:56
Great-Kazoo

Quote:

Originally Posted by XXFattyHunterXX

I plan running an AAC can, I should've clarify. They have adapters from 26mm to 1/2x28 but not sure if that's recommended?

IF it's a factory adapter then yes. HOWEVER . You really ne to check concentricity of the bore, using one of those suppressor gauges . Not sure where i purchased mine, but they were not as pricey as the SF units.

https://www.surefire.com/products/su...lignment-rods/
08-30-2021, 11:34
XXFattyHunterXX

Quote:

Originally Posted by Great-Kazoo

IF it's a factory adapter then yes. HOWEVER . You really ne to check concentricity of the bore, using one of those suppressor gauges . Not sure where i purchased mine, but they were not as pricey as the SF units.

https://www.surefire.com/products/su...lignment-rods/

I don't think Zastava has a factory option for an adapter. It would be nice to skip the adapter and get it re-thread, i'm not really desperate to shoot it suppressed, just seeing if i can find someone local to get it done.
09-01-2021, 20:19
electronman1729

Jackson Creek Armory does great ak work. Don't forget BP tactical!
09-01-2021, 20:23
Great-Kazoo

Quote:

Originally Posted by XXFattyHunterXX

I don't think Zastava has a factory option for an adapter. It would be nice to skip the adapter and get it re-thread, i'm not really desperate to shoot it suppressed, just seeing if i can find someone local to get it done.

It's not from Zastava, my bad. It's from what ever suppressor mfg, you have a suppressor for. Like i said, if it was a Gemtech halo, i have the adapter and spacer. Based on those and other AK's with com bloc barrels, i'd run a 30 cal can.
09-01-2021, 21:42
XXFattyHunterXX

Quote:

Originally Posted by electronman1729

Jackson Creek Armory does great ak work. Don't forget BP tactical!

Bert doesn't do gunsmithing anymore, ITAR.
I'll call Jackson creek and ask, thanks!
09-01-2021, 21:47
XXFattyHunterXX

Quote:

Originally Posted by Great-Kazoo

It's not from Zastava, my bad. It's from what ever suppressor mfg, you have a suppressor for. Like i said, if it was a Gemtech halo, i have the adapter and spacer. Based on those and other AK's with com bloc barrels, i'd run a 30 cal can.

For sure, I know what you mean. AAC is now gone, they never have such adapters either. The adapter I was referring to was 26mm to 1/2x28, then I would install an AAC 51t muzzle device to make the can fit. Like below, not exact but similar.

https://uploads.tapatalk-cdn.com/202...9f4d6586b9.jpg
09-02-2021, 09:05
asystejs

McMaster-Carr has affordable precision rods to check alignment

https://www.mcmaster.com/catalog/127/4036