Steel target pics

Printable View

03-27-2013, 14:08
soldier-of-the-apocalypse

Steel target pics

I just bought a 12" piece of ar500 so I need to make a gong. so lets see them. I want to make mine like the one they have in the magpul dynamics: art of the precision rifle where they have a separate plate for the head and another plate for the body.
03-27-2013, 15:39
yardsells

1 Attachment(s)

Mine isn't that fancy. I went for cheap and fast. A couple sticks of rebar and some black pipe welded up and walla. the AR 500 is from wideners.
Attachment 24661
03-27-2013, 16:56
soldier-of-the-apocalypse

that pretty much what I was going to do until I seen the magpul video
03-27-2013, 20:59
gnihcraes

PVC.. lighter and easier to fix if you miss. :)

http://i1103.photobucket.com/albums/...rgetstand3.jpg
03-27-2013, 23:06
islandermyk

Here are my steel target set ups.

Broken down. Steel is 18" in height by 12" wide. it's so light that I use this target for a thousand and out. It dances when you hit [Coffee]
http://i418.photobucket.com/albums/p...ps20fe5a4b.jpg

All set up:

http://i418.photobucket.com/albums/p...ps71e05c6d.jpg

Here's one that I use for 200 yards to 600 yards.
http://i418.photobucket.com/albums/p...ps1ea7c1da.jpg
It's a brake rotor with another piece of steel in the back (It's now up front). I went this route so I don't have to worry about ruining it with armor piercing, or steel core rounds shooting it.

I also painted the steel reddish/pinkish high florescent color so I could find them at far distances not much for spotting hits... the back is black so when it gets hit it starts flopping around giving a good indication it was a hit...

I learned all that stuff from you guys on here! [Beer]
03-29-2013, 09:54
soldier-of-the-apocalypse

ok here is the first prototype I made it out of some junk laying around the shop in about a hour. Im gona make a new on when I get the steel for the torso

http://i492.photobucket.com/albums/r...8BA355EF1B.jpg

http://i492.photobucket.com/albums/r...8BB47FB68A.jpg
http://i492.photobucket.com/albums/r...8BAADB92D1.jpg
03-29-2013, 10:06
Hoser

Quote:

Originally Posted by soldier-of-the-apocalypse

ok here is the first prototype I made it out of some junk laying around the shop in about a hour. Im gona make a new on when I get the steel for the torso

You realize the first time you miss low you can completely destroy the stand?
03-29-2013, 11:55
soldier-of-the-apocalypse

Quote:

Originally Posted by Hoser

You realize the first time you miss low you can completely destroy the stand?

I doubt it the steel I used was 1/4 inch thick so it should hold up to .308 but like I said the original plan was to put another peice of ar500 below
03-29-2013, 11:59
soldier-of-the-apocalypse

here is a pic of the magpul target I should have watched the video again before I made mine lol

http://i492.photobucket.com/albums/r...990BD3B453.jpg
03-29-2013, 13:00
Hoser

Quote:

Originally Posted by soldier-of-the-apocalypse

I doubt it the steel I used was 1/4 inch thick so it should hold up to .308 but like I said the original plan was to put another peice of ar500 below

308 will smoke through .250 mild steel like it wasnt even there, even past 600 yards.

If you put a chunk of AR-500 in front of the base it should help. Keep in mind how low the bottom target is. If you miss low, you can throw a bunch of dirt on the plate and they get really hard to see with a fresh coat of dirt.
03-29-2013, 13:24
soldier-of-the-apocalypse

Quote:

Originally Posted by Hoser

308 will smoke through .250 mild steel like it wasnt even there, even past 600 yards.

If you put a chunk of AR-500 in front of the base it should help. Keep in mind how low the bottom target is. If you miss low, you can throw a bunch of dirt on the plate and they get really hard to see with a fresh coat of dirt.

good to know since Im not 100% happy with the outcome I dont mind if I blow it apart lol as soon as I get the other plate I will remake it any way
03-29-2013, 14:37
bowhunter

1 Attachment(s)

You guys put way more effort into this then me.
Attachment 24801
03-29-2013, 23:12
Tim K

Back in the early 80's, I had a 30-30 shooting really mildly loaded lead RN bullets. I don't know the muzzle velocity, but they were not fast. They went through 1/4" steel like it was cardboard. Screwed our pistol backstop up in a big hurry. One hit from a .308 is going to blow that stand right to bits.

I did some penetration testing with sections of steel I beam some years ago. My conclusion was that mild steel in thicknesses less than about 3/4" offered concealment, not cover, from rifle fire.