Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Plinker
    Join Date
    Oct 2012
    Location
    Westminster
    Posts
    67

    Default Upper \ Lower Play

    I seem to have a little bit of play between my upper and lower...I seen and heard of a Wedge to place in the lower behind the Take Down Pin.. I've also heard mention of an O-ring...Are either one worth the trouble or should I just live with it? I know that either option will not affect shooting, but its more of a confidenve thing...ANY INPUT ???????

  2. #2
    Self Conscious About His "LOAD" 00tec's Avatar
    Join Date
    Sep 2011
    Location
    Aggieland, TX
    Posts
    4,275

    Default

    Try an o ring, then if it's still sloppy, swap the o ring for the wedge.
    My rifle had slop and I went straight for a wedge (given to me). Now it's VERY tight. Good and bad comes from it.

  3. #3
    Plinker
    Join Date
    Oct 2012
    Location
    Westminster
    Posts
    67

    Default

    Where do you put the O ring?

  4. #4
    Self Conscious About His "LOAD" 00tec's Avatar
    Join Date
    Sep 2011
    Location
    Aggieland, TX
    Posts
    4,275

    Default

    On the rear lug of the upper

  5. #5
    The Red Belly TheBelly's Avatar
    Join Date
    Mar 2011
    Location
    Leavenworth, KS
    Posts
    6,057
    Blog Entries
    1

    Default

    Upper-lower slop has no effect on accuracy. I suppose an extreme amount would, but by the time you'd probably have other worries.
    Just doing what I can to stay on this side of the dirt.

  6. #6
    Worlds Shortest Tall Guy kwando's Avatar
    Join Date
    Nov 2005
    Location
    Elizabeth, Colorado
    Posts
    3,676

    Default

    Orange foam ear plug is all you need. I just live with it
    "An armed society is a polite society when a man may have to back his last words with gunplay."

    My Feedback

  7. #7
    The Red Belly TheBelly's Avatar
    Join Date
    Mar 2011
    Location
    Leavenworth, KS
    Posts
    6,057
    Blog Entries
    1

    Default

    If you do decide to tackle this 'problem', make sure that whatever you put in there is not going to go flying into your FCG at a random and inappropriate time.
    Just doing what I can to stay on this side of the dirt.

  8. #8
    High Power Shooter
    Join Date
    Feb 2011
    Location
    DTC, CO
    Posts
    824

    Default

    JB Weld!
    The chair is against the wall has a long mustache.

  9. #9

    Default

    Upper and lower play is somewhat common and does have the potential to mess with accuracy but not likely.

    Spend $5 and get yourself an Accu-Wedge and be done with it.

    https://www.google.com/#q=accu+wedge

    Noah at Ark Tactical has them in stock I believe
    Certified NRA Instructor, ask me about CCW classes

    /l , [____],
    l----L -OlllllllO-
    ()_) ()_)------)_) Jeep ΜΟΛΩΝ ΛΑΒΕ

  10. #10
    Grand Master Know It All SouthPaw's Avatar
    Join Date
    Mar 2010
    Location
    Greeley
    Posts
    3,116

    Default

    I bought a seekins billet lower and it has an adjustment screw for lower to upper retention. All my other rifles have the "play" and I just live with it. It does kind of suck when you buy a noveske lower, VLTOR upper and put them together to have a little wobble. Oh well.
    "But when it's time to fight, you fight like you are the third monkey on the ramp to Noah's Ark; and brother, it's startin' to rain."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •