Air bag? Hahahaha
Thanks for the info.
Colorado AR-15 Shooters Club Discussion Forums
Welcome to the Colorado AR-15 Shooters Club Discussion Forums.
Welcome to the Colorado AR-15 Shooters Club Discussion Forums.
Air bag? Hahahaha
Thanks for the info.
Micheal HoffHard times make strong men
Strong men create good times
Good times create weak men
Weak men create hard times
Do you know anybody with access to Alldata?
They would have the schematic in there.I have it at work,but cant get it at home.
FHUGETABOUDIT!!!
This might help you out a bit.....
http://www.gobookee.org/get_book.php...BESUFHUkFNUw==
My T.P. wheeling and dealing feedback is here.
Opinions are like assholes, everybody has one, and it stinks more than mine.
Yo Homie, That my chainsaw ?
Pati, improbe et vince
relay
Self control: The minds ability to override the body's urge to beat the living sh.. out of some ass.... who desperately deserves it.
The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government.
Thomas Jefferson
Obama, so full of crap it is a miracle Air Force One can even get off the ground,
Who needs wipers? I'm going to start on copying this.
http://www.nc4x4.com/forum/index.php...vative.145236/
Micheal HoffHard times make strong men
Strong men create good times
Good times create weak men
Weak men create hard times
That cage is a sure way to die in a fire.
"There are no finger prints under water."
The umm "door protection" isn't welded closed, just to the door itself. The guy is retarded but apparently didn't go full retard.
The snow has melted in time for the water pump to take a dump. No warning, just a green fountain.
Replaced the WP, thermostat, serpentine belt and valve cover gasket. While replacing the valve cover gasket, I broke the temp sending unit on the back of the block. Picked up a new on from NAPA. Installed and started driving. The temp was 40˚ above normal! Rechecked everything. Still running hot. Took it to the local mechanic and hooked up a scanner to it. Temp gauge went to 250˚ and the scanner pegged at 210˚. Yep, the sensor is a POS.
Guess I'll be buying more parts from the dealer. I hate going to dealers.
Also replaced the oil filter adapter O rings, starter and battery this winter.
Up next:
Back up lamp switch.
Outer axle joints and maybe a front axle rebuild.
Motor mounts.
Auxiliary lighting.
Micheal HoffHard times make strong men
Strong men create good times
Good times create weak men
Weak men create hard times
Just
Empty
Every
The most important thing to be learned from those who demand "Equality For All" is that all are not equal...
Gun Control - seeking a Hardware solution for a Software problem...
What's the odometer reeding on that one?Originally Posted by Ah Pook
The snow has melted in time for the water pump to take a dump. No warning, just a green fountain.
Replaced the WP, thermostat, serpentine belt and valve cover gasket. While replacing the valve cover gasket, I broke the temp sending unit on the back of the block. Picked up a new on from NAPA. Installed and started driving. The temp was 40˚ above normal! Rechecked everything. Still running hot. Took it to the local mechanic and hooked up a scanner to it. Temp gauge went to 250˚ and the scanner pegged at 210˚. Yep, the sensor is a POS.
Guess I'll be buying more parts from the dealer. I hate going to dealers.
Also replaced the oil filter adapter O rings, starter and battery this winter.
Up next:
Back up lamp switch.
Outer axle joints and maybe a front axle rebuild.
Motor mounts.
Auxiliary lighting.
Posting Permissions
Reply With Quote
