does it backfire?
Colorado AR-15 Shooters Club Discussion Forums
Welcome to the Colorado AR-15 Shooters Club Discussion Forums.
Welcome to the Colorado AR-15 Shooters Club Discussion Forums.
does it backfire?
Nope idles great bogs hard at wot which may be something I did when I pulled the carb apartOriginally Posted by Trigg3r Happy
You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.
My feedback add 11-12 ish before the great servpocaylpse of 2012
You replace the fuel lines? Sometimes the most head scratching problem has the simplest fix, especially if it's been sitting. What's another $4-5 in line? ALSO one other area that causes loss of power is the petcock. Sediment, gunk, broke down fuel line shit can clog the screen just enough to restrict fuel.
The Great Kazoo's Feedback
"when you're happy you enjoy the melody but, when you're broken you understand the lyrics".
Yamaha 4 stroke gurus I have an issue
I don't know what the deal is with MC shops being closed on Mondays, but it's invariably timed like my cravings for Chic-fil-A.
I ALWAYS want or need to go when they're closed..
Sent from my iPad using Tapatalk HD
The people lived in fear of reprisal from their leaders, children cried themselves to sleep, all hope was lost... and then there was a whale.
www.bugoutwhale.com
Sounds like jetting. As previously stated if you didn't remove and clean the jets, they are probably clogged.
I agree
I pulled all the jets out and cleaned quite well them not my first time playing with a mikuni carb and its tiny little passages had a 79 Suzuki 750 with 4 of them grrr
You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.
My feedback add 11-12 ish before the great servpocaylpse of 2012
Bike shops are traditionally closed on mondays so the employees can have two days off.. since they are traditionally open on saturdays too ...
Esp since they are often mom and pop type operations ( like Tfogs) there are no days off when you are open . Besides... monday day rides in the mountains RULE.. less traffic
Yamaha 4 stroke gurus I have an issue
I think the air fuel screw on these have to be drilled out and turned 3 turns on this bike or something weird to be adjusted. I haven't done it yet.
A good place to start
http://www.xt225.com/forums/ubbthrea...Board=3&page=1
Sent from my iPad using Tapatalk HD
The people lived in fear of reprisal from their leaders, children cried themselves to sleep, all hope was lost... and then there was a whale.
www.bugoutwhale.com
Do the '04 still have the brass cover over the screw - I thought the newer models did away with them? #34 is the pilot screw. Stock setting is 1 1/4 out. #31 is the needle valve set - the top half round piece is the screen I was talking about. http://www.boats.net/parts/search/Ya...TOR/parts.html Yes, its a boat site, but has a good diagram of the correct carb.
Posting Permissions
Reply With Quote