Problems setting up a WFT..

[ray1970]

I like my WFT. Perfectly repeatable and trims everything to the same length assuming they are all sized before trimming. The initial setup could be tricky if you don't already have a piece of brass that is the correct length to use to set it up. Holding on to the brass while trimming it is my biggest complaint. Gets a little rough on the fingers after many cases.

Sorry it it isn't working out for you. It is a pretty nice setup for the price.

[SideShow Bob]

Try following this video.
http://www.youtube.com/watch?v=utFnbwtNoP0

If you still need to use a , let me know.

[asmo]

Try following this video.
http://www.youtube.com/watch?v=utFnbwtNoP0

If you still need to use a , let me know.

Danke for the pointer. That's basically what I did the first time but without the consistent results. The only thing I can think is wrong is that my shoulders are out of spec (something wrong with my FL sizing die -- Dilion Carbide) and fluctuating, so I am getting an inconsistent seating in the trimmer. Sounds weird but I cant think of anything else. When I FL size/deprime I have my die all the way down to the shell plate and then backed off a half a turn - nothing crazy or special setting..

If you have a Giraud that you are willing to rent time on I will take you up on it. Lemme know when, where, and how much beer/scotch you want.