Close
Results 1 to 10 of 12

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I am my own action figure
    Join Date
    Jan 2010
    Location
    Wheat Ridge
    Posts
    4,010
    Blog Entries
    1

    Default

    6+ year old...I would not mess with the anode nor the T&P at this point. Check it once a month, when you see rust starting to appear around the bottom pan of the skin, time to change it out.

    If you have a WH with a plastic drain, I would pull it, let the water drain out, replace with a brass one. While it is out, rent a scope from HomeDespot and look at the anode through the open port.
    Good Shooting, MarkCO

    www.CarbonArms.us
    www.crci.org

  2. #2
    Official Thread Killer rbeau30's Avatar
    Join Date
    May 2011
    Location
    AURORA, CO
    Posts
    2,631

    Default

    Quote Originally Posted by MarkCO View Post
    6+ year old...I would not mess with the anode nor the T&P at this point. Check it once a month, when you see rust starting to appear around the bottom pan of the skin, time to change it out.

    If you have a WH with a plastic drain, I would pull it, let the water drain out, replace with a brass one. While it is out, rent a scope from HomeDespot and look at the anode through the open port.
    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •