Quote Originally Posted by jslo View Post
This thing does not get heavy use. We use it maybe 6 to 8 times a month October through February. I pulled the heating element in January and it looked just like it did 2 years ago when I replaced it and it tested good. Back then when I turned it from auto to timed the element heated up then tripped the high limit switch. I then thought it was a flow issue so I removed the filter and let it run. Got temp up to 80 or so but next morning back down. Looked at it again today a little but haven't been able to duplicate last month's results. Was just hoping someone could give me a logical 1, 2, 3 list of parts to swap out or come over and fix the fucker.
whats the water level? yes it's an odd ?. However if it at or below the jets you could be getting air pockets. Our tub would kick off and or cycle weird. After looking at everything. I decided to check what the H2O level was. Sitting it was good. Once it went to a circ mode it was low enough to cause issues. Topped it off and no issues.