Motorheads...What ya building.

[meatman]

I need to get back in the garage. I've had a machined AMC 401 sitting on the engine stand for the past year waiting to get put together and be swapped with the 360 in my '76 J20 pickup. I also have a machined AMC 360 on an engine stand waiting to get put together to go into my '76 CJ-7 that hasn't seen an engine in the 6 years that I've owned it.

Maybe this thread will help get my ass in gear? Anyone want to help me assemble some engines?

[JMBD2112]

I've got a 71 Chevy C/10 in storage. Its my first truck. It'll be chopped to a SWB, have an LSx and T56 transplant someday.

You'll need to post pics of that when you're done.

[Colorado_Outback]

This thread needs more pics..

[RCCrawler]

Blew the 350 in the crew cab last summer, finally getting around to getting the new motor in. 2 weekends ago I got the motor and tranny mounted, headers figured out, now it's time to plumb, wire, get the front clip back on, install new fuel cell, ect, ect, ect... We were able to get the new motor a few inches lower, and a few inches further back as well.

The plan is to have it running for a test run to Goodguys the first week in June, then we're going to head to the back to the 50's show in Minnesota at the end of June.

New motor is a 6.0 LSX that been cranked up a bit, mated to a 4l80e. Next winters project will be turbo charging it. my goal is 500-600hp on the ground.

[TriggerHappy]

2012 WR450F, getting it set up for a title then adding a supermoto setup for riding around Denver and to work. Needs headlight hi/low and horn switch, a horn, and pressure break light switch.

[mindfold]

Blast Tech is the best in the biz…..
Gary is a stand up guy.

Thanks for the tip. I have a 74 CJ5 in the third stall now. Tub and fenders are getting blasted ASAP.

[Snowman78]

Blew the 350 in the crew cab last summer, finally getting around to getting the new motor in. 2 weekends ago I got the motor and tranny mounted, headers figured out, now it's time to plumb, wire, get the front clip back on, install new fuel cell, ect, ect, ect... We were able to get the new motor a few inches lower, and a few inches further back as well.

The plan is to have it running for a test run to Goodguys the first week in June, then we're going to head to the back to the 50's show in Minnesota at the end of June.

New motor is a 6.0 LSX that been cranked up a bit, mated to a 4l80e. Next winters project will be turbo charging it. my goal is 500-600hp on the ground.

I LOVE the farm plate!

[HoneyBadger]

I LOVE the farm plate!

And the fuzzy dice..

[Dave_L]

I have a '65 mustang that I'm working on. Building a nice 331 stroker motor for it. Should get some nice life into the car. Has a 289/C4 combo right now.

[Chad4000]

yeah RCCrawler.. love that truck. .always have..