Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    I'm a dude, I swear! SuperiorDG's Avatar
    Join Date
    Mar 2011
    Location
    CCC / Golden
    Posts
    3,070

    Default Removing primers?

    So I've been collecting brass for sometime now with the intent of reloading one day. So now I have this big pile of brass and I want to get into reloading slowly. First I want to start with cleaning up this brass and I know how to clean it, but I don't know what I need, as far as equipment goes, to remove the primers. What do I need to get this done?

    Thanks

  2. #2
    High Power Shooter
    Join Date
    Oct 2012
    Location
    Loveland
    Posts
    926

    Default

    I bought one of these http://www.amazon.com/Lee-LP90292-Pr...s=lee+decapper

    and then got a single stage press off armslist for like 20 bucks. Then all I needed were the shell holders for the various rounds.

    Still haven't moved up to cleaning brass, but when I do will go with a tumbler and stainless steel pins.
    Last edited by cableguy11; 07-21-2014 at 13:40.

  3. #3
    The "Godfather" of COAR Great-Kazoo's Avatar
    Join Date
    Sep 2003
    Location
    Washboard Alley, AZ.
    Posts
    48,074

    Default

    Quote Originally Posted by SuperiorDG View Post
    So I've been collecting brass for sometime now with the intent of reloading one day. So now I have this big pile of brass and I want to get into reloading slowly. First I want to start with cleaning up this brass and I know how to clean it, but I don't know what I need, as far as equipment goes, to remove the primers. What do I need to get this done?

    Thanks
    A good press. Removing a big pile of primers by hand, will sour you on reloading by the second hour. Then again you did say slowly. OR come on up and rent on of the presses.
    The Great Kazoo's Feedback

    "when you're happy you enjoy the melody but, when you're broken you understand the lyrics".

  4. #4
    Machine Gunner DenverGP's Avatar
    Join Date
    Dec 2013
    Location
    Anna Tx
    Posts
    1,541

    Default

    I always clean my brass before removing the primer. Otherwise you can get bits of the cleaning media stuck in the primer holes.

  5. #5
    I'm a dude, I swear! SuperiorDG's Avatar
    Join Date
    Mar 2011
    Location
    CCC / Golden
    Posts
    3,070

    Default

    Quote Originally Posted by DenverGP View Post
    I always clean my brass before removing the primer. Otherwise you can get bits of the cleaning media stuck in the primer holes.
    Good to know. Also would help me to not buy a lot of stuff right away. Thanks

  6. #6
    I'm a dude, I swear! SuperiorDG's Avatar
    Join Date
    Mar 2011
    Location
    CCC / Golden
    Posts
    3,070

    Default

    Quote Originally Posted by Great-Kazoo View Post
    A good press. Removing a big pile of primers by hand, will sour you on reloading by the second hour. Then again you did say slowly. OR come on up and rent on of the presses.

    Thanks, but by the time I went through all this brass I would be too drunk to leave.

  7. #7
    Varmiteer Ranger353's Avatar
    Join Date
    Oct 2007
    Location
    Black Forest, CO.
    Posts
    722

    Default

    It depends on the brass on whether or not I remove the primers before tumbling or not. If it's .45ACP then its okay because the pocket is so big nothing really gets stuck. But, if it's .223 (5.56) then you can wait until after it's been tumbled first because those small pockets will get clogged up in no time at all with media matter.

    If you're using a sonic brass cleaner then deprime before. The Lee Decapper is the best way to remove primers. But if you are using a progressive press then it normally deprimes the case on stage one so don't bother.

    Lots of options, and can be confusing too. Good luck and have fun.
    U.S. Marine Corps (retired)
    Gong Shooter Fanatic and Reloading Fool


  8. #8
    A FUN TITLE asmo's Avatar
    Join Date
    May 2012
    Location
    Douglas County (Parker)
    Posts
    3,446

    Default

    What you need is a a Dillon 650.. I'll sell you one 'cheap' with all the trimmings --- so I can go buy a 1050.

    Oh and first pass = Decap/Deprime only. Then I tumble.
    Last edited by asmo; 07-21-2014 at 17:03.
    What is my joy if all hands, even the unclean, can reach into it? What is my wisdom, if even the fools can dictate to me? What is my freedom, if all creatures, even the botched and impotent, are my masters? What is my life, if I am but to bow, to agree and to obey?
    -- Ayn Rand, Anthem (Chapter 11)

  9. #9
    The "Godfather" of COAR Great-Kazoo's Avatar
    Join Date
    Sep 2003
    Location
    Washboard Alley, AZ.
    Posts
    48,074

    Default

    Quote Originally Posted by SuperiorDG View Post
    Thanks, but by the time I went through all this brass I would be too drunk to leave.
    Crank up the 650 or 1050, you'll be done in less time than it takes to make the drive up and back. Regarding media in flash holes, it's a non issue. Like the debate about tumbling loaded rounds , to remove the lube.
    Guy over on arfcom, or Benos? did a test of tumbled totally clean, tumbled with media etc. He found no difference FPS, or performance wise between media free and small bits of media remaining. he also test loaded some 223 with media blatantly left in the flash hole, again no issue.
    The Great Kazoo's Feedback

    "when you're happy you enjoy the melody but, when you're broken you understand the lyrics".

  10. #10
    MODFATHER cstone's Avatar
    Join Date
    Mar 2010
    Location
    Baltimore, MD
    Posts
    7,472

    Default

    The only wrong way is to not do it at all. Here is how I remove primers. I collect just about anything brass I can find at the range. Always take some buckets. When I get home, and I want to do some relaxing, I sit on the front porch with the bucket of brass, a couple of smaller buckets for sorting, and a Harvey deprimer: http://www.harveydeprimer.com/

    Its a little like whittling. Do as much or as little as you are inclined to do in a sitting. I collect all the spent primers and they go to the scrap brass pile with discarded brass casings. Once the brass is deprimed, first inspection, and sorted by caliber, it goes into a tumbler with lizard bedding (ground walnut). A couple hours later and the rifle brass is ready for sizing and trimming and the pistol brass is ready for reloading. If the brass is in a caliber that I don't shoot or reload, and it is in decent condition, it becomes trade fodder. If the brass is damaged, it is discarded into the scrap pile.

    Once you catch up, keeping up isn't too hard. I can easily deprime and sort a few hundred cases in an hour. The Harvey is simple because it can handle anything short of .50 caliber. I can deprime .380, .45, .30-06, and 7.62x54R, as long as it is boxer primed without skipping a beat.

    Not for everyone, but it works for me.
    Corruptissima re publica plurimae leges.

    My Feedback

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •