New Trigger options for DPMS LR308?

[belizejet]

Anyone have a recommendations for trigger replacements on a DPMS LR 308? I want the most affordable but good quality replacement. So many options, so I would like some feedback on what you all think.

[Lars]

http://geissele.com/super-semi-autom...r-trigger.html. I put one of these in my .243 and one is going in my 6.5 Creedmoor next. I have a CMC in my Creedmoor right now and I really like it, but it doesn't compare to the Geissele that is in my .243. They are clean and crisp.

[DocMedic]

Is it the 2-stage DPMS? I don't know how or why but the 2-stage DPMS I got is so smooth that I ended putting in my Gap-10 o.0 The trigger breaks just under 3.7 lbs.

[belizejet]

I have a spare RRA 2-stage match trigger I'm gonna put in it. It's just a gritty stock trigger right now.

[oldcharlie]

I have a Palmetto state PA 10 in 308, I just put some JP reduced power springs in it and it dropped my trigger pull to 3 pounds! They say that the springs may ort may not set off military ammo. I load my on and it fires every time. this is a $10 up grade including shipping from Mid-Way.

[brutal]

For lower price than SSA triggers, I have a couple G2S triggers installed that are about $125 when you can find them on sale (usually two for $250). http://geissele.com/geissele-2-stage-trigger.html

Hypertouch EDT2 for $90 is my next test when it comes in. http://www.hiperfire.com/hipertouchedt2.html

Any 2-stage DPMS, RRA is going to best a stock GI trigger. You can stone the GI triggers a little to improve upon the grittiness, but most are treated to shallow depths and you'll end up with a soft sear/hammer and short service life.

[cardman]

I have the ALG trigger with the JP spring on. my 6.8. It is a good step up from stock. My other triggers are Hiperfire, Geissele and Elftmann. I like single stage triggers over 2. Hiperfire is my favorite, unfortunately not cheap. Around $210.

[belizejet]

I have a Hiperfire in my competition 3-gun rifle. They are awesome for sure.

[ar15shooter]

I just put a Geissele Hi-Speed DMR in my LMT and it is pretty sweet. I thought the factory LMT 2 stage was pretty decent until I put this trigger in. Total trigger weight is about 3 lbs 7 oz and has a very crisp break.