Plate sizing question?

[Mtn.man]

Ar500 armor, has the best prices and has some killer package deals going right now. Make sure to get curved plates with the extra build up. Ar500 plates are the way to go there heavy but rock solid and not fragile. Just my 2 cents for what its worth.

Agree, and they have them on Ebay.

[th3w01f]

Good points on the AR500, I tend to buy more than I need.

[Mr.Fred]

Does that mean you're offering to buy them for me and resell them at a slight markup?

no can do. I'm just glad I don't have to jump through those hoops.

AR500Armor.com has cheap stuff that's decent quality.

You have no idea how funny that comment is to the staff.

You confuse the hell out of me and refuse to talk to me so I have no idea how to take you.....

Posted Via Glade Plug In.

[ZERO THEORY]

I bought Large AR500 plates. I'm 6'2" 195. They're heavy, but they don't have an expiration date like SAPIs, and you can use your carrier as a supplement to your strength and conditioning with steel plates.

[275RLTW]

Here's something I wrote for another forum with a very similar question:



Getting the right size and using the correct sized plates are more important than brand. Padded straps don't mean shit if the carrier isn't for you. When getting plates, they should cover from your jugular notch to just below your rib cage in the front and from about C6-7 to T8-9 in the back (I run back plates a bit higher than pictured due to greater threat from elevated positions and to allow more mobility). See picts below:




Once you figure out what size plates you need, you can pick your carrier size. Large plates won't fir well in a Med. You can run Med plates in a Large PC but they may shift a bit. It's not uncommon to run a med PC with a Large cumberbun. It's better to run plates a tad small rather than too large. Too large of plates will restrict your arms forward movement, espetially when pushing forward with a pistol.

How often and what you intend to use the gear for will determine what price range. Condor/Voodoo stuff is cheap and good for the occasional class but don't expect it to hold up to routine use. You do get what you pay for. My LBT 6094 costs about $400 but I can load it down and run with it all day long, every day without it moving around. My JPC cost less and is a snugger fit however it sucks with more than 15-20 lbs on it. Stick to well reviewed (reviewed by shooters, not air softers) kits like SKD, Mayflower, Crye, LBT, VS, etc...

Trying some on and out is the key. While this may not be easily done at the local gun store, finding some locals at the range who can let you try their kit out will help you make better decisions. You'll find that 1 PC can't do everything you want. Mission drives the gear...I have 4 different PCs I use frequently depending on the mission.



Regarding types of plates-do your research. Hopefully Mick-boy will chime in with some of the articles he's written about ceramic vs. steel. I've worn ceramic and steel (with and without backers) and I prefer ceramic every time. Thickness isn't as much as an issue for me as is weight and protection level. If you're looking to protect your life, don't go cheap. If you're looking for range/training stuff then look on armslist. (I've seen ESAPIs for less than $200 there)

[davsel]

Colorado Springs Craigslist (Ft Carson) and Armslist often have ESAPIs for good prices.

[Great-Kazoo]

They would be flat...

I have a guy who can arch them off the sheet.

[th3w01f]

Here's something I wrote for another forum with a very similar question:

Your article is probably the one I read that pointed me to an XL due to the 11+ nip to nip. For a PC I'm thinking of a PIG or Mayflower APC, I'm not sure who might have those locally.

[cofi]

I wouldn't do ar500 plates lots of info out there about spall etc

if you plan on using them for more then just to take up a spot in your closet buy yourself a set of stand alone triple curve ceramic plates

im about the same size as you I run a large plate up front and an xl in back with a mayflower apc

[sellersm]

The AR500 spall "problem" has been addressed by their LineX coatings. Or run a soft armor 'plate' behind it?