Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Beer Meister DFBrews's Avatar
    Join Date
    Dec 2010
    Location
    With the classyish Hipsters...Stapleton
    Posts
    3,178

    Default Reloading 37mm chalk rounds

    I picked up a deftec launcher couple 3 weeks ago ordered some shells to reload and have been working on making a cheap easy to make chalk round. I have only done some preliminary testing around 10 shots and only 2 had actual powder in them even with just a primer My lobbing distance is about 50 yards. the 2 with powder maxed out my 200 yard range with only 15 grains of triple 7 behind them.


    the projectile themselves are half of an easter egg and cap from a spray can of brake clean. I am a diesel mechanic and we go through a bunch of it a week so there is never a short supply the cap is plastic and is the perfect size for use in the 2" nylon hulls with a primer in it is an air tight seal.







    Finding easter eggs right now is difficult to say the least. I came across the perfect sized ones in the party section of walmart they come in a pack of 6 filled with knock off silly putty. cost is $1.97 so 12 projectiles for 16 cents a piece they measure right at 36 mm OD


    I fill the easter egg half with chalk then put the plastic cap in behind it and hot glue it in with the top of the cap against the chalk. this gives it a weight forward design like shotgun slug in flight they have been very stable and always hit nose first either direct fire or lobbed in.








    here is the completed round. After gluing in the cap I take a rounded rod heated up a bit and run it around the glue to make a smooth surface that sits flush on the shell.





    3 more completed rounds


    You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.

    My feedback add 11-12 ish before the great servpocaylpse of 2012

  2. #2
    BIG PaPa ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    18,799
    Blog Entries
    1

    Default

    I think I've seen those at Toys-R-Us.

  3. #3
    Self Conscious About His "LOAD" 00tec's Avatar
    Join Date
    Sep 2011
    Location
    Aggieland, TX
    Posts
    4,275

  4. #4
    Banned
    Join Date
    Jan 2010
    Location
    Larimer County
    Posts
    1,580
    Blog Entries
    1

    Default

    Nicely done!

  5. #5
    Beer Meister DFBrews's Avatar
    Join Date
    Dec 2010
    Location
    With the classyish Hipsters...Stapleton
    Posts
    3,178

    Default

    Quote Originally Posted by ray1970 View Post
    I think I've seen those at Toys-R-Us.
    thanks coloccw it has been fun I have a m79 stock and forend coming for it as well

    I will have to check out toys r us

    and 00tec i dont know if those ones you linked are the right size need to be just a hair under 1.5" when easter comes around i am going to stock up on the right size ones
    Last edited by DFBrews; 11-01-2014 at 20:39.
    You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.

    My feedback add 11-12 ish before the great servpocaylpse of 2012

  6. #6
    BIG PaPa ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    18,799
    Blog Entries
    1

    Default

    I meant those toy rounds you are making. Not the Easter eggs.

  7. #7
    Beer Meister DFBrews's Avatar
    Join Date
    Dec 2010
    Location
    With the classyish Hipsters...Stapleton
    Posts
    3,178

    Default

    Quote Originally Posted by ray1970 View Post
    I meant those toy rounds you are making. Not the Easter eggs.

    I am working on the form 1 so I can shoot the fun stuff like buckshot and flethcettes right now all i can shoot are flares, smoke and OC and CS rounds

    I will give you 20 bucks if you run into the CS or OC cloud from one of the crowd control rounds... we could even start a pool bet you could make 100 bucks or so
    You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.

    My feedback add 11-12 ish before the great servpocaylpse of 2012

  8. #8
    The "Godfather" of COAR Great-Kazoo's Avatar
    Join Date
    Sep 2003
    Location
    Washboard Alley, AZ.
    Posts
    48,107

    Default

    Try Hobby Lobby, michaels or other craft store.
    The Great Kazoo's Feedback

    "when you're happy you enjoy the melody but, when you're broken you understand the lyrics".

  9. #9
    BIG PaPa ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    18,799
    Blog Entries
    1

    Default

    Quote Originally Posted by DFBrews View Post
    I will give you 20 bucks if you run into the CS or OC cloud from one of the crowd control rounds... we could even start a pool bet you could make 100 bucks or so

  10. #10
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default

    Quote Originally Posted by DFBrews View Post
    I am working on the form 1 so I can shoot the fun stuff like buckshot and flethcettes right now all i can shoot are flares, smoke and OC and CS rounds

    I will give you 20 bucks if you run into the CS or OC cloud from one of the crowd control rounds... we could even start a pool bet you could make 100 bucks or so
    Start collecting cash and let me know when you're over $200.
    "There are no finger prints under water."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •