Close
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default Looking for help with lower power .223 loads

    Well, between night vision and a suppressed AR, I want to load some lower velocity 223 loads. Went shooting the other night and it was pretty much magical, except for listening to the supersonic crack sound light a fighter jet going over. But even that was pretty cool.

    ive researched subsonic and don't want to deal with it for 223. I have a .22 suppressed that shoots subsonic and cycles the gun. I'm not interested in a single shot AR

    basically I was curious if you guys have done any load testing for lower power, and lower noise that will reliably cycle an AR. 16". Can be either 1/9 or 1/7 twist as I have both.

    and also, is it even worth it? I'm sure I will still hear the supersonic crack traveling after I shoot. The suppressor is definitely quiet enough even shooting standard m193 rounds. But I think it could stand to be a but more quiet and possibly cut down on the supersonic noise as well.

    let me know your thoughts
    Last edited by sniper7; 12-12-2014 at 22:53.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  2. #2
    Beer Meister DFBrews's Avatar
    Join Date
    Dec 2010
    Location
    With the classyish Hipsters...Stapleton
    Posts
    3,175

    Default

    I think Kazoo played with low power .223 and the results where less than spectacular... Is your can 223 or 30 cal? .30 cal begs to have some blackout ran through it
    You sir, are a specialist in the art of discovering a welcoming outcome of a particular situation....not a mechanic.

    My feedback add 11-12 ish before the great servpocaylpse of 2012

  3. #3
    BIG PaPa ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    18,799
    Blog Entries
    1

    Default

    Repost.

    Seriously, I seem to remember a thread about this somewhere here. Although, it might have actually been about subsonic loads.

    Or I could be thinking of something else.

    Who knows.

    I've got nothing for you I guess.


  4. #4
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default

    Yeah it was Kazoo who tried this and I think the result was to go with 300 blkout for suppressed.
    "There are no finger prints under water."

  5. #5
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    I found his thread on subsonic loads but that's not what I'm after. I still want supersonic, just at lower velocities, and I wasn't sure what FPS value and bullet weight to try out so I figured I'd see if there was anyone here who tried it. And if it will make a big difference with a suppressor and the supersonic sound that can be heard after the shot.
    i don't have a chrono yet so was mostly looking for load data to start with.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  6. #6
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    Quote Originally Posted by DFBrews View Post
    I think Kazoo played with low power .223 and the results where less than spectacular... Is your can 223 or 30 cal? .30 cal begs to have some blackout ran through it
    Unfortunately 223. I kick myself a little but for not just getting a .30 can.

    guess I'll have to get another one...such a shame.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  7. #7
    Grand Master Know It All crays's Avatar
    Join Date
    Feb 2010
    Location
    Live-Aurora Work-Golden
    Posts
    4,257

    Default

    Once you hit supersonic speeds, will a projectile of that size/mass make that much of a difference in sound intensity within that range? I don't know the science behind it, so I am just asking.

    ETA: SS crack of .223 projo at threshhold of sub/super vs same at 3000-3200FPS ?
    Last edited by crays; 12-12-2014 at 23:25.
    Comply in public, Conduct in private.

    FEEDBACK

  8. #8
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default

    So this brings up the question of whether all super sonic cracks are made equal. Is that pretty much what your trying to find out?
    "There are no finger prints under water."

  9. #9
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    Quote Originally Posted by Irving View Post
    So this brings up the question of whether all super sonic cracks are made equal. Is that pretty much what your trying to find out?
    I guess that is pretty much it. I know the lower pressure/FPS of the projectile will produce a less decibels.

    but the supersonic crack has me curious.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  10. #10
    QUITTER Irving's Avatar
    Join Date
    Nov 2008
    Location
    Denver, CO
    Posts
    46,527
    Blog Entries
    1

    Default

    I suppose if you knew some dudes with different suppressed guns you could just have them run different stuff like .308 vs. .270 or something to save you time in the reloading room. Interested to hear what you find.
    "There are no finger prints under water."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •