Harris vs. Atlas bipod

[Spdu4ia]

Call Kyle at xlr he will hook you up with what you need.

[ray1970]

Call Kyle at xlr he will hook you up with what you need.

I only need three small machine screws. Probably just be easier to pick them up at Ace Hardware or cut mine down.

If I decide to order the folding mechanism for the stock I might have him toss some screws in on the order.

[Spdu4ia]

Thought of getting that too but didn't want to add to the lop , cheaper to buy a bigger bag :-)

[ray1970]

Thought of getting that too but didn't want to add to the lop , cheaper to buy a bigger bag :-)

I was just thinking about cleaning. Seems like the cheek riser might be all in the way.

[Spdu4ia]

I run my cleaning rod under the riser , didn't plan on it but just worked out with were i have it set . You will need a really long rod though ("that's what she said")

[ray1970]

I run my cleaning rod under the riser , didn't plan on it but just worked out with were i have it set . You will need a really long rod though ("that's what she said")

I think my rod is 36". Makes me pretty popular with the ladies too.

[Spdu4ia]

I have an extra extension if you need it . For the ladies of course.

[smchop]

http://youtu.be/sWvWZ0PpTu4

side by side comparison. if you can swing it, i say atlas.

This. If you want to try one, I'll loan you one of mine, no likey get a harris, no money lost.

[ray1970]

This. If you want to try one, I'll loan you one of mine, no likey get a harris, no money lost.

Thanks for the offer. Pretty much decided I'll probably just go with the Atlas. I'll probably swing by Mile High and check them out this Friday.

I need to find a good 20MOA base too. I want one with a "recoil lug" so I had to rule out a couple I was considering. Need to do some research on bedding the base to the receiver as well.

[Delfuego]

Pretty much decided I'll probably just go with the Atlas.

If you decide on Atlas, the PSR model is nice. It's stiffer and the legs do not spin.

I need to find a good 20MOA base too. I want one with a "recoil lug" so I had to rule out a couple I was considering. Need to do some research on bedding the base to the receiver as well.

Seekins makes a good base for a good price (w/recoil lug). Though with 308 the Lug will not be critical. Also a quality base should not need to be bedded.

What a can of worms you have opened Ray!