My "Precision" Rifle

[ray1970]

Did you decide on glass yet?

No. Probably something from Vortex. If I decide to skip the FFP I will most likely get the Viper HS-T 4-16.

Dont worry about it. If you still have a gap after putting some ass on all the screws, then you have a problem.

The paint does look cool for sure.

I've always valued your opinion when it comes to bad ass firearm type stuff. Afraid I'm going to have to skip your well intentioned advice on this matter though. I'm trying to make this thing as perfect as possible. And my mild case of OCD just wouldn't let me live with a base that I know has a slight twist in it once I torque it down.

[Hoser]

Afraid I'm going to have to skip your well intentioned advice on this matter though. I'm trying to make this thing as perfect as possible. And my mild case of OCD just wouldn't let me live with a base that I know has a slight twist in it once I torque it down.

No problem at all. Let us know how the base bedding part works out.

[ray1970]

No problem at all. Let us know how the base bedding part works out.

I'll post up some pictures when I do it. I have a plan. Just need to figure out what kind of compound to use. I have some metal repair stuff at work that is pretty awesome (and expensive). Might see if it will work. Not sure which ones we have but here's a link.

http://www.belzona.com/en/products/p...al-repair.aspx

[XC700116]

I'll post up some pictures when I do it. I have a plan. Just need to figure out what kind of compound to use. I have some metal repair stuff at work that is pretty awesome (and expensive). Might see if it will work. Not sure which ones we have but here's a link.

http://www.belzona.com/en/products/p...al-repair.aspx

I've used JB weld to bed 3 of my rifle scope mounts, and plan to do it on number 4 as soon as it's finished being built. It works well, is cheap, and I've pulled the base on one a couple times to check it and it's held up fine in the over 2800 rounds through that rifle. (yes, my OCD compels me to log every round down the barrel)