Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    GLOCK HOOKER hurley842002's Avatar
    Join Date
    May 2009
    Location
    Tucson, AZ
    Posts
    8,023

    Default Rifle value help

    If this is the wrong place to ask this question, I apologize and could the mods move to the appropriate section.

    I have a relative in a bit of a financial bind, and is looking to offload some rifles. I'm in a financial position to help him out on the lot, but I need to know that I'm at least going to get my money back eventually. There are probably a couple I'd keep, but the rest I don't have a big interest in. All rifles are in good to great condition, not sure on round counts, but none of the barrels are close to being "shot out". Here is the list of rifles, can ya'll help me out, I'm the Glock hooker, not the bolt rifle specialist lol.

    1903 Springfield 30-06 that's been sporterized (I'd likely keep as it was my grandfather's).

    Pre 64 model 70 Winchester in .270.

    Pre 64 model 70 Winchester in .220 swift.

    Remington 700 in 264 Win mag.

    Ruger model 77 in 22 hornet.

    Ruger model 77 in 7mm Rem mag.

    What say you? Thanks for any info.

  2. #2
    GLOCK HOOKER hurley842002's Avatar
    Join Date
    May 2009
    Location
    Tucson, AZ
    Posts
    8,023

    Default

    Also to add, I've browsed a bit on gunbroker but not much info.

  3. #3
    Looking Elsewhere
    Join Date
    Oct 2012
    Location
    The Peoples Republic (Boulder)
    Posts
    3,163

    Default

    It's a soft market right now, doubt you would get anything near what any of them are worth.

  4. #4
    Machine Gunner
    Join Date
    May 2012
    Location
    Trinidad
    Posts
    1,223

    Default

    Your money is in the two pre 64s. Probably $800-1000 for the 270, more the better condition it gets. The 220 swift really depends on the model. It can go for $1200 on up to several thousand depending on condition and model. Rugers are probably in the $4-500 range and the Remmy is a touch more. Obviously rough estimates and not including scopes.

  5. #5
    GLOCK HOOKER hurley842002's Avatar
    Join Date
    May 2009
    Location
    Tucson, AZ
    Posts
    8,023

    Default

    Quote Originally Posted by def90 View Post
    It's a soft market right now, doubt you would get anything near what any of them are worth.
    Yeah that's what I told him, made him aware he'd need to leave some buffer room so I don't get hosed.

  6. #6
    GLOCK HOOKER hurley842002's Avatar
    Join Date
    May 2009
    Location
    Tucson, AZ
    Posts
    8,023

    Default

    Quote Originally Posted by encorehunter View Post
    Your money is in the two pre 64s. Probably $800-1000 for the 270, more the better condition it gets. The 220 swift really depends on the model. It can go for $1200 on up to several thousand depending on condition and model. Rugers are probably in the $4-500 range and the Remmy is a touch more. Obviously rough estimates and not including scopes.
    Thanks for the info. After a bit more research, I'm finding those pre 64's to be worth some coin (depending on condition of course), I had no idea how desirable they were.

  7. #7
    Machine Gunner esaabye's Avatar
    Join Date
    Apr 2009
    Location
    Northern Colorado Springs
    Posts
    1,217

    Default

    The 1903 is worth 2-3 depending on how it was sporterized. Of course you will want to hold on to it but consider restoring it to bring the value back up to 6-8. I always feel good about restoring an old battle rifle back to base configurations.

  8. #8
    Gong Shooter
    Join Date
    May 2013
    Location
    DENVER, CO
    Posts
    400

    Default

    About $3k for the lot +/-

    Condition matters way more then most think on value of old guns. Some folks think their "pretty good" is 98% but its not. This can affect value around 50% or so.

  9. #9
    GLOCK HOOKER hurley842002's Avatar
    Join Date
    May 2009
    Location
    Tucson, AZ
    Posts
    8,023

    Default

    Quote Originally Posted by sportbikeco View Post
    About $3k for the lot +/-

    Condition matters way more then most think on value of old guns. Some folks think their "pretty good" is 98% but its not. This can affect value around 50% or so.
    So pretty much a gamble. I could offer him $2.5k for some buffer room, and either break even, or find out the model 70's are worth a couple grand a piece to a collector (which I see them going for $1k to $10k depending on model/caliber/condition). I also just found out the Model 70 in 220 swift is the target/heavy barrel variation and is around 1952 production. The model 70 in 270 is around 1947-49.

  10. #10
    Zombie Slayer wctriumph's Avatar
    Join Date
    Dec 2008
    Location
    N W of Fort Collins
    Posts
    6,188

    Default

    Here is the thing about Winchester Model 70, pre-64 edition.

    They are only valuable to collectors if they are untouched and original. Model 70 rifles were rarely drilled and tapped for scope mounts from the factory so if a scope has been added the value is mostly as a shooter and of course condition will play a huge role. If the rifle has or had iron sights on it and now wears a scope, value is decreased from collector values. An original Model 70 that is in MINT condition and in "nonstandard" calibers will bring the most. If modified at all and in standard calibers, no collector value to a "collector". Still, they are great rifles to own and shoot.

    I would say at retail values and waiting for the right buyer, $3150 for the lot is fair. If you want some buffer room so you won't loose money and / or you want to make a profit, then I would say $2200 to $2500 for the lot.
    Last edited by wctriumph; 02-21-2015 at 16:04.
    "If everyone is thinking alike, then somebody isn't thinking."
    George S. Patton

    "A people that values its privileges above its principles soon loses both."
    Dwight D. Eisenhower

    "Conformity is the jailer of freedom and the enemy of growth."
    John F. Kennedy

    ?A motorcycle is a bicycle with a pandemonium attachment, and is designed for the special use of mechanical geniuses, daredevils and lunatics.?
    George Fitch. c 1916.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •