Ruger precision Rifle

[Great-Kazoo]

So what has everyone done with their tweaked/canted handguards? Wasn't it I just need to undo and retighten or what was the trick with that? Spent most of my time with my brake trying to find the right spacer to realize with 20 degree's per ring, I needed like a 10 degree so I'm slightly off from true centered >.<


Attachment 64225

There's a few discussions on line about the rpr hand guard cant.
Shimming the brake requires a few different sized spacers. Did you buy a .308 shim kit? it's usually found next to suppressors in most LGS

[DocMedic]

I own 2 Samson evolution rails on my ar's so I might help, but it will require you to take off your optic. First, flip the rifle upside down and place flat on a leveled table. Losses the the Handgaurd retaining screws. Flatten out out Handgaurd and slowly retite the screws. For best results use adjustable clamps.

[Great-Kazoo]

I own 2 Samson evolution rails on my ar's so I might help, but it will require you to take off your optic. First, flip the rifle upside down and place flat on a leveled table. Losses the the Handgaurd retaining screws. Flatten out out Handgaurd and slowly retite the screws. For best results use adjustable clamps.

He could also use a carry handle to align and hold the rail to receiver, while tightening the hardware. I use one for all float tube installs.

[fitz19d]

There's a few discussions on line about the rpr hand guard cant.
Shimming the brake requires a few different sized spacers. Did you buy a .308 shim kit? it's usually found next to suppressors in most LGS

I got the Precision Armament M11, it came with a bunch of precisely sized spacers with a little chart of what to try first and what to use next. Pretty nice except that where I think it needs to be is like perfectly between them. Might try filing down one of the washers sometime. And it may be on me, since I'm just using a cloth and a pipe wrench to tighten it down, no vices either. Don't have a torque wrench so unsure if it actually can be tightened down quite a bit more but don't think so.


Neat @ carry handle idea. Finally a use for those antiques. So if I had a old picatinny scope riser that's like 6 inches, I could probably use that?

[brutal]

I got the Precision Armament M11, it came with a bunch of precisely sized spacers with a little chart of what to try first and what to use next. Pretty nice except that where I think it needs to be is like perfectly between them. Might try filing down one of the washers sometime. And it may be on me, since I'm just using a cloth and a pipe wrench to tighten it down, no vices either. Don't have a torque wrench so unsure if it actually can be tightened down quite a bit more but don't think so.


Neat @ carry handle idea. Finally a use for those antiques. So if I had a old picatinny scope riser that's like 6 inches, I could probably use that?

Just find someone that hasn't sent their Eotech back yet and use that.

[Great-Kazoo]

I got the Precision Armament M11, it came with a bunch of precisely sized spacers with a little chart of what to try first and what to use next. Pretty nice except that where I think it needs to be is like perfectly between them. Might try filing down one of the washers sometime. And it may be on me, since I'm just using a cloth and a pipe wrench to tighten it down, no vices either. Don't have a torque wrench so unsure if it actually can be tightened down quite a bit more but don't think so.


Neat @ carry handle idea. Finally a use for those antiques. So if I had a old picatinny scope riser that's like 6 inches, I could probably use that?

Drop by after work and we'll get the brake and hand guard aligned.

[Spdu4ia]

I had the m11 brake and you need to put it in a barrel vice and crank it down on the shim and it will fit perfect. Love that brake (everyone else will hate you though).

[rtr]

With a little load work I've gotten a pretty decent group with mine in .243.

[Great-Kazoo]

Very nice, that's the beauty of reloading. Tailoring the load to the gun.

[Delfuego]

That group is from the factory barrel?