Quote Originally Posted by Lurch View Post
I could run by Sunday afternoon and give you hand trying to figure things out.. I have a bunch of experience trouble shooting my own well.
Thanks for the offer, I think we're good to go for now.

Be careful when using n LP heater in an inclosed space. Ventilate the space before entering it, you could have a high concentration of CO in there. You could go in, and not come out,

You can tap the power at the pump to run some heat tape to keep things warm if the overload protection can take the load of the tape and starting current of the motor.
Good advice, I'll let it clear out for a few minutes after removing the cover.

Not sure how to tap the power at the pump, would I just cut the 3 prong off of the heat tape and match up white and black (ignoring ground)? Would it be best to tap in above the fuses (between the switch and the breaker feeding the pump)?