Butler creek 10/22 mag issues.

[Erni]

A couple of the buttler creek 25 rounders I have are jamming. The top round will not pop up and jams into the mag feed ramp. Any sugestions on how I can make them work?
Thanks.

[Spdu4ia]

Buy ruger mags. I never could "fix" the butler creek mags on my 10/22

[Wulf202]

They will warrantee them. Of course you're bound by state lines

[Erni]

They will warrantee them. Of course you're bound by state lines

Is sending mags in for warranty giving up ownership under CO laws?

[Great-Kazoo]

A couple of the buttler creek 25 rounders I have are jamming. The top round will not pop up and jams into the mag feed ramp. Any sugestions on how I can make them work?
Thanks.

Round file on the back of the mag. Gives a little more for the bolt to grab, when cycling.

[Erni]

GK,
File to make the round sit higher in the feed lips?

[Great-Kazoo]

GK,
File to make the round sit higher in the feed lips?

Rear of mag, allows bolt to pick up the round better. Small rat tail file does the trick. This is a beater mag so i used what ever i had on the table to show what is needed.

[Erni]

I'll give that a try.

[Wulf202]

Also sometimes there is a casting line that interferes with the feed. Since they're not serviceable you can shove the follower down and look and gently file

[kidicarus13]

Butler Creek Hot Lips = BAD
Butler Creek Steel Lips = GOOD