Solar Stuff...

[Grant H.]

Thanks. Not looking for a panel, just a portable inverter large enough to run the wood pellet stove and a 12 volt deep cycle shown in my previous build^. More of an experiment to see how long it will last. Might build up a battery bank to support it for a longer duration.

Makes sense. I would go browse through Samlex and Aims offerings and shop the part number you want around for the best price.

Side note, do you actually need pure sine?

What, I suppose the pellet stove needs pure sine wave for timing purposes?

[gnihcraes]

Makes sense. I would go browse through Samlex and Aims offerings and shop the part number you want around for the best price.

Side note, do you actually need pure sine?

What, I suppose the pellet stove needs pure sine wave for timing purposes?

Not sure it needs pure sine, but it does have some control boards that I'd rather not fry. Auger motor and blower motor can't take much power, it's the igniter that chews up the initial load. thus why it says 800 watts required.

Looks like there might be some Aims on amazon used for reasonable price.

[jerrymrc]

Not sure it needs pure sine, but it does have some control boards that I'd rather not fry. Auger motor and blower motor can't take much power, it's the igniter that chews up the initial load. thus why it says 800 watts required.

Looks like there might be some Aims on amazon used for reasonable price.

My backup for my pellet stove had 240 Ah of AGM batteries tied into a 700 watt UPS. the load running the blower and auger was 120W running the blower and another 55 or so for the auger. I ran it once for 5+ hours on battery and it was above 50%.

[gnihcraes]

My backup for my pellet stove had 240 Ah of AGM batteries tied into a 700 watt UPS. the load running the blower and auger was 120W running the blower and another 55 or so for the auger. I ran it once for 5+ hours on battery and it was above 50%.

awesome. good to know. Someday I'll quit being lazy and measure it all while running.