Road Bikes

[KestrelBike]

One thing to think about for that first bike is that from what I've heard multiple times, carbon components should be replaced every 5-7 years if they're load-bearing. So that's frames, but most especially the forks. Since it's a 2011 bike, that means that the forks are at least 5 years old and may be due for a replacement, which could quickly cost ~$130+.

[Honey Badger282.8]

I have a Trek 330. Rode it a few times, probably less than a 100 miles. Bought it used. Steel frame. I got about $175 into it. Google it. If you like it, and it fits, $75 for you. There are two listed on Ebay right now asking between $400 and $600. I have the clipless shoes to go with it too. It was a great bike on the paved trail along I-70 in Glenwood Springs. I haven't ridden it since 2005. Lemme know if you are interested. Maybe you can resell it...

Thanks but I'm out in CA for four months or I might be interested.

One thing to think about for that first bike is that from what I've heard multiple times, carbon components should be replaced every 5-7 years if they're load-bearing. So that's frames, but most especially the forks. Since it's a 2011 bike, that means that the forks are at least 5 years old and may be due for a replacement, which could quickly cost ~$130+.

I've read that too in my research but I've also seen it mentioned that it was more of a rule of thumb for older bikes. It seems like there are two camps on this, which only adds to my confusion.

http://cyclingtips.com/2015/08/what-...-carbon-frame/