Close
Results 1 to 6 of 6

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guest
    Join Date
    Dec 2008
    Location
    Rural Boulder County
    Posts
    731

    Default Heading out to hunt steel - Prime ammo

    Time to acquire DOPE for the 130grn 6.5 Creedmoor ammo.


    The ELD-M147's were impressive but looking for a little more MV. Hoping for 2,840ish speed with these little pils.


  2. #2
    The "Godfather" of COAR Great-Kazoo's Avatar
    Join Date
    Sep 2003
    Location
    Washboard Alley, AZ.
    Posts
    48,102

    Default

    Looks like a fairly steep area you're in.
    The Great Kazoo's Feedback

    "when you're happy you enjoy the melody but, when you're broken you understand the lyrics".

  3. #3
    Tims Favorite Dick
    Join Date
    Mar 2013
    Location
    Divide
    Posts
    493

    Default

    Barrel length?

  4. #4
    Guest
    Join Date
    Dec 2008
    Location
    Rural Boulder County
    Posts
    731

    Default

    24" with TBAC CB30 9" Zach.

  5. #5
    Tims Favorite Dick
    Join Date
    Mar 2013
    Location
    Divide
    Posts
    493

    Default

    Shouldn't be a problem. My daughters 22" is at 2870.

  6. #6
    Guest
    Join Date
    Dec 2008
    Location
    Rural Boulder County
    Posts
    731

    Default

    Avg is about 2800-2810 today. (1,850 rounds through this barrel).
    20+ mph wind and the best SD was 15 and 19 for this 5 shot group using factory ammo.
    I ran them through the seating die to a 2.155 to ogive. Also tested other lengths but 2.155 was the winner with the Magnetospeed installed. Going to run without in a few. Need to work on my tripod shooting now because it sucks.



    Shot below with turrets at zero (above was .2L) with magnetospeed removed. Not much change in elevation. Dang wind!!!



    So so far the prime ammo is shooting well. Only got out to 700 yards with a 4.4 mil elevation and 1.5-2.2 mil wind hold left based on indicators. Need to be run these through the seating die for consistent length and test again with minimal influence from wind.
    Last edited by Blowby; 05-24-2017 at 13:41.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •