Comparison of suppressors?

[Ridge]

Hi all,

With the HPA and SHARE dead in the water (for now) I'm looking at starting the process on a suppressor.

I've got a Sig P228 and a CZ Scorpion EVO gen1, both will be running 13.5x1 LH muzzle threads.

I'm looking at the SilencerCo Octane 9 HD 2 and Osprey 9

Anybody with these that can offer a comparison, or maybe even a demonstration?

Thank you

[paddywagon]

From my perspective, I would rather have a 45 cal can as it opens more options. The difference between the Octane 45 and 9 is only about an inch and you can use all the same pistons on it and run 45, 357 Sig, 40 S&W, 10, 9mm, 300 BO sub, etc. Osprey is the same in that regard as well. Big advantage to Osprey is not having to change sights on low sight handguns that you installed a barrel on and did not install hi sights. PM me if you'd like.

[Great-Kazoo]

Agree with PW. Go with a 45 can, it's that much more adaptable. I was going with a 9mm can sometime back, switched to a 45. Happy i did so i can shoot 9, 45 and 357.

[CS1983]

Definitely go "up" a caliber if you can. I don't have any pistol cal cans, but with my .30 cal I run it on everything .30 down to .22 (with thread adapter rockset in place on barrel).

[lostcolorado]

Hi all,

I've got a Sig P228 and a CZ Scorpion EVO gen1, both will be running 13.5x1 LH muzzle threads.

Thank you

Did you have the scorpion barrel re-threaded?

[Ridge]

Did you have the scorpion barrel re-threaded?

Nope, getting an adapter.

https://czcustom.com/cz-scorpion-evo...ter-m13-5.html

[lostcolorado]

Nope, getting an adapter.

https://czcustom.com/cz-scorpion-evo...ter-m13-5.html

That makes scenes. Adapter to match the sig barrel. With 9mm my mind automatically goes to 1/2x 28.

[DangerLee_Industries]

Ridge swing on by the new shop brother. I have 50 plus in the case and a handful more on display guns to check out buddy. Same distNce to the storefront as it was to my home shop.

I'm still matching or beating internet pricing here as I did at the house!

[Jer]

Nope, getting an adapter.

https://czcustom.com/cz-scorpion-evo...ter-m13-5.html

I think I had one of these when I first got my Evo. Since I had mine cut & rethreaded for the k conversion I may still have one around although I seem to recall selling it. I'll double check but it'll probably be this weekend.

[izzy]

+1 to getting a .45 suppressor