Close
Results 1 to 10 of 10

Thread: Wyoming goat

  1. #1
    Team Burris
    Join Date
    Apr 2009
    Location
    Northern Mississippi
    Posts
    161

    Default Wyoming goat

    Well, only drew 1 tag, at least it was a buck tag. Any way, I was setting down glassing looking at 40 or 50 antelope and trying to decide how in the world I could put a stock on anything when I spot a buck and doe start walking in my direction. After about 20 minutes he gets in range. The wind was 15 gusting 26 slighly quartering towards their direction. The doe was about 35 yards in front of him. I had to shift a little for the shot and my leg was starting to go asleep, the doe busted me. She was staring right at me so I drop the binoculars and got ready to shoot. The buck wasn't paying any attention to me and took a couple more steps. He stopped perfectly broad side. I touched off the shot and lucked out. I estimated the yardage at 350 to 400yds. It was more like 300yds. With the doe staring at me I didn't use my range finder.

    He is the biggest buck I have taken. He is very thick at the base. The talley is as follows:
    Right side 14" long 7 1/4" girth
    Left side 11 1/4" long 7 girth.
    He must have been fighting hard.
    You can see from the pictures how flat it is and by my hat how strong the wind was blowing.


    [FONT='Rockwell','serif']It had snowed over the weekend and if I didn’t have chains I would have never made it in. It took about 2 hours to go 24 miles on axle grease.[/font]
    Attached Thumbnails Attached Thumbnails antelope2  2009 small.jpg   not off trailer yet.jpg   antelope 2009 small.jpg   Wyoming axle grease.jpg  
    Last edited by Dinosdeuce; 10-16-2009 at 20:15.
    will work for:
    bullets primers & brass


    XTR II 4 x 20 SCR
    XTR II 5x25 SCR
    XTR II 3x15 SCR
    XTR III 5.5x30 SCR

    Hawkins Precision




  2. #2
    smwarner
    Guest

    Default



    Good Job! Nice looking animal!!



  3. #3
    Machine Gunner ronaldrwl's Avatar
    Join Date
    Jul 2009
    Location
    Tyler, TX
    Posts
    1,693

    Default

    Good job, nice story. Love to hear about hunting trips.

  4. #4
    ColoEnthusiast
    Guest

    Default

    Well done! What caliber, 7mm?

  5. #5
    Team Burris
    Join Date
    Apr 2009
    Location
    Northern Mississippi
    Posts
    161

    Default

    Quote Originally Posted by ColoEnthusiast View Post
    Well done! What caliber, 7mm?

    Ruger MKII 25.06 100gr TSX in front of 51gr of IMR4350
    will work for:
    bullets primers & brass


    XTR II 4 x 20 SCR
    XTR II 5x25 SCR
    XTR II 3x15 SCR
    XTR III 5.5x30 SCR

    Hawkins Precision




  6. #6
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    great job!
    You wouldn't need those chains if you bought a real truck like a GMC

    I kid I kid!

    Nice loper, I didn't draw this year, so i am hopeful for next year!
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  7. #7
    Guest
    Join Date
    Sep 2009
    Location
    Denver
    Posts
    303

    Default

    Nice take.

  8. #8
    Team Burris
    Join Date
    Apr 2009
    Location
    Northern Mississippi
    Posts
    161

    Default

    Quote Originally Posted by sniper7 View Post
    great job!
    You wouldn't need those chains if you bought a real truck like a GMC

    I kid I kid!

    Nice loper, I didn't draw this year, so i am hopeful for next year!
    Good luck with next years draw.

    I always put in for 3 tags one type 1 and 2 type 6 tags. I usually get at least 2, not so this year. maybe I was really lucky to get those tags before.

    I know what you mean about a real truck. This Ford doesn't handle as well in the snow or mud as other trucks I have owned. I think it may because of the weight on the front end from the diesel. Just guessing as I never owned one before. However driving on that axle grease I don't know if anything would have made a difference.
    will work for:
    bullets primers & brass


    XTR II 4 x 20 SCR
    XTR II 5x25 SCR
    XTR II 3x15 SCR
    XTR III 5.5x30 SCR

    Hawkins Precision




  9. #9
    Guest
    Join Date
    Nov 2008
    Location
    TN/ ex-CO
    Posts
    1,045

    Default

    What part of the state did you hunt?

  10. #10
    Team Burris
    Join Date
    Apr 2009
    Location
    Northern Mississippi
    Posts
    161

    Default

    Quote Originally Posted by GunTroll View Post
    What part of the state did you hunt?

    South central near Laramie. The land is hunted fairly heavy. I always wait until around the 3rd week of season to go. By then they are very wary, but I almost never see anyone else hunting (the trade off I except).
    will work for:
    bullets primers & brass


    XTR II 4 x 20 SCR
    XTR II 5x25 SCR
    XTR II 3x15 SCR
    XTR III 5.5x30 SCR

    Hawkins Precision




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •