That looks much easier than a Chevy Truck. The Chevy you have to do it with the coil installed on the truck.Then remove the lower control arm. Reassembled, the coil only fits one way. Effing nerve wracking to do as the compressors have to go on the coil in exactly the right places.Make sure the coils are clean and grease free, so they can't slip. The trick is to turn one turn on the compressor, then do the other side one turn.Symmetrical compression. If the coils don't compress easily, something is wrong. The threads on the compressors have to be damage free. You can rent the tool for free from Autozone, just make sure it is serviceable. If it is abused, go find one from another store. Hope this helps.