Question about precision dies

[Tim K]

Trim after resizing. Cases get longer during FL resizing. I almost never trim, cause I hate it, only when it has to be done.

Either way works great with a Giruad. I'm just barely smart enough to compensate for the fact that the case length is going to change after I size. Just barely.

[Delfuego]

Either way works great with a Giruad. I'm just barely smart enough to compensate for the fact that the case length is going to change after I size. Just barely.

You have the cool kid tools, why not use them


The comparators are cheap!
https://www.sinclairintl.com/reloadi...prod34014.aspx
https://www.sinclairintl.com/reloadi...prod35265.aspx

I would start slow and add more steps if they are needed. I am lazy and do the bare ass minimum.

Wipe dirt off brass with a cloth
Spray lube
FL resize with the expander and decapper
Tumble (walnut)
Prime
Charge
Seat
Done!

Every 3-4 firings I will
Deprime
Stainless Tumble
Anneal