Close
Results 1 to 3 of 3
  1. #1
    Bang Bang Ridge's Avatar
    Join Date
    Dec 2007
    Location
    Cedar Park, TX
    Posts
    8,214

    Default Question about upgraded irons

    Anybody know if the Nodak Spud NDS-26 10/22 rear sight lines up with the Tech Sights front sight? I have the latter, but want to put a rail on my gun so I can quickly swap a scope off/on, but the Nodak front sight doesn't work on the Takedown barrel.

    The NDS-13 looks almost identical to the Tech Sights TSR-100

    https://www.nodakspud.com/NDS-22.htm
    https://www.tech-sights.com/ruger-products/

  2. #2
    Industry Partner FireMoth's Avatar
    Join Date
    Apr 2010
    Location
    Centennial
    Posts
    367

    Default

    I would highly suggest you inquire with both companies about height over bore or height over reciever from center of aperture to see if they match.
    ...However...
    The tech sight is supposed to work with the factory front sight of the anniversary edition rifle.
    Though this sight is taller than the standard front sight by a good bit, visually it does not look as tall as the Nodak spud.
    So, were i to guess, the answer would be "No", but you wont know for sure till you get a comparable measurement from the two companies.

    Finally, i would suggest that using the MagPul barrel lug rail mount and a long eye relief/pistol scope or a red dot there mounted would both solve this dilemma and net a more repeatable result, with optic staying true to barrel rather than reciever
    If You Aren't Offended, Try Re Reading... With A Thesaurus This Time

    Bowers Tactical
    6931 S. Yosemite St. Suite 400
    Centennial, CO 80112
    720-985-2041
    www.bowerstactical.com



    FireMoth's Razor:
    "Often the simplest solution is to Slit a few throats"

  3. #3
    Bang Bang Ridge's Avatar
    Join Date
    Dec 2007
    Location
    Cedar Park, TX
    Posts
    8,214

    Default

    Quote Originally Posted by FireMoth View Post
    I would highly suggest you inquire with both companies about height over bore or height over reciever from center of aperture to see if they match.
    ...However...
    The tech sight is supposed to work with the factory front sight of the anniversary edition rifle.
    Though this sight is taller than the standard front sight by a good bit, visually it does not look as tall as the Nodak spud.
    So, were i to guess, the answer would be "No", but you wont know for sure till you get a comparable measurement from the two companies.

    Finally, i would suggest that using the MagPul barrel lug rail mount and a long eye relief/pistol scope or a red dot there mounted would both solve this dilemma and net a more repeatable result, with optic staying true to barrel rather than reciever
    Thank you, Rob. Yeah, I'll reach out to them, I was just hoping someone else on here had the same stupid idea as me and would know off hand of that.

    I'll have to look into that Magpul rail mount. I had considered getting a bull barrel with integral rail, as well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •