Quote Originally Posted by TRnCO View Post
It's not really too difficult. I don't remember where I bought my stove pipe from, BUT they had diagrams showing several options and once a guy figured out the configuration that he was going to do, it was easy to see what parts were needed.
For instance, will you go up and elbow through the wall and then elbow straight up to the vent without going through an over hang on the roof, OR will you go straight up through a ceiling, through the attic, and then through the roof.

If I remember which website I used I'll let you know. But it showed all the options and then showed what pieces were needed and there's all kinds of instructions to be found on the web of doing installs.

I also found a guy local in Elizabeth that would do installs, but when he came to look at mine he wouldn't even give me an estimate. Not sure why, other than it wasn't a straight forward deal since I did a 45 degree run of pipe to get to an angled wall that I went through, instead of going up and doing a 90 through the wall directly behind the stove. So maybe the complex angles were what kept him from wanting to tackle my job. SO I had a good friend come help me do my install.
This^^^

Local fireplace contractor was "too busy"(he didnt want to deal with custom install) so I did the research mostly on Simpsons Dura Vent web site and made sure eveything was well above code for materials and clearances.

I used Simpson Dura Vent double wall insulated for entire chimney and ceiling box. I did a 15? offset in attic to avoid going thru roof at the peak as the parts would have to be custom made. Hercules Industries was willing to make the part but price and lead time were too long/high.

Once I had my design and parts list I ordered Simpson Dura Vent pipe thru local supplier to builders.

Once parts arrived install only took half a day and most of that was spent making sure ceiling box was just right.

You can stand next to stove and reach up and touch chimney without burns. Down close to stove the double wall is pretty hot but not the instant blistered burn like touching the stove.

We burn 4-6 cords a season and wood stove is our primary heat source for 2200sf ranch style log home.