Close
Results 1 to 8 of 8
  1. #1
    Moderator SA Friday's Avatar
    Join Date
    Jan 2009
    Location
    Castle Rock
    Posts
    4,201

    Default Gun Review: GT Products LLC, CO Springs. POS tanner rip-off!

    Today I worked on an AR-15 that the customer brought in and said wouldn't run. We have a general battery of questions we ask to try to narrow down parts in the gun and why it's not operational. In my 4 years at Bowers and the thousands of guns I've worked on, this was one of the worst made AR's I've seen. The rifle has less than 100 rounds through it and had never run according to the owner. It was now completely inop. The rifle was purchased from GT from the Tanner Gun Show within the $500 range.

    The following were the parts/assembly that failed:

    - Buffer tube is softer aluminum than 6061 T-6 and had twisted and stripped the threads off by the end plate, garbage
    - Buffer was a single piece of aluminum and painted black, garbage
    - Buffer spring was painted black, had a kink in it (how the fuck do you kink a buffer spring if it's spring steel? ), garbage
    - Castle nut was not standard steel and painted not phosphate coated, not staked, and had come loose shooting the buffer retainer and spring out of the lower
    - Bolt carrier group was replaced before brought to me due to excessive galling on the BCG (no further info but it was fucked up too)
    - Gas block was completely loose, no loc-tite on retaining screws and they were never torqued down, gas jet marks from the port around the barrel indicated the gas block was never sealed around the port
    - Gas tube roll pin hanging half out and was undersized when attempted to complete installation
    - The gas port in the 16" carbine length 556 barrel (unknown manufacturer) was measured to be 0.110" !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    - Handguard was Chinese made and all 6 retaining screws from the handguard into the barrel nut were removed BY HAND (no wrench was used, metric wrench BTW), and no Loc-tite on any of the screws

    This rifle was made with the cheapest parts available with nothing in mind other than selling it as cheap as possible and making a buck. This was NOT a functional gun when sold and with the gigantic gas port size, may never be. Whomever swapped the BCG did this poor kid no favors. At least it head-spaced and didn't blow up in his face. I rebuilt the BCG, even the gas rings were smoked. That's not on the original manufacturer, but I would love to have seen what the original BCG was if this one was the better of the two.

    I hate it that there are people in my profession willing to sell junk like this and prey on the uninformed. This was the kid's first rifle and he got screwed. This is NOT how we build a decent reputation within the gun community. Do NOT buy from this company.
    Mom's comin' 'round to put it back the way it ought to be.

    Anyone that thinks war is good is ignorant. Anyone that thinks war isn't needed is stupid.

  2. #2
    #1 5.556 FAN ray1970's Avatar
    Join Date
    Feb 2010
    Location
    Thornton
    Posts
    14,672
    Blog Entries
    1

    Default

    As someone who makes a living fixing jacked up rifles maybe you should hope the guy sold a boat load of these things.

    People say nothing is impossible but I do nothing every day.
    My Feedback

  3. #3
    Grand Master Know It All crays's Avatar
    Join Date
    Feb 2010
    Location
    Live-Aurora Work-Golden
    Posts
    3,567

    Default

    By chance, did JoeK bring in this rifle?




    Sorry... had to.


    I guess the guy should have bought a BCA rifle.


    Sorry.. had to again..

    Sent from somewhere...
    Comply in public, Conduct in private.

    FEEDBACK

  4. #4
    Grand Master Know It All crays's Avatar
    Join Date
    Feb 2010
    Location
    Live-Aurora Work-Golden
    Posts
    3,567

    Default

    Actually, though, it would be easy enough for some internet savvy folks to track down the principals of said LLC.


    Or we could just Les Fletcher, Plano TX them.

    Sent from somewhere...
    Last edited by crays; 04-10-2019 at 06:05.
    Comply in public, Conduct in private.

    FEEDBACK

  5. #5
    Grand Master Know It All crays's Avatar
    Join Date
    Feb 2010
    Location
    Live-Aurora Work-Golden
    Posts
    3,567

    Default

    All jokes aside, this is no laughing matter.

    Sent from somewhere...
    Comply in public, Conduct in private.

    FEEDBACK

  6. #6
    Say "Car RAMROD!" J's Avatar
    Join Date
    Sep 1983
    Location
    Westminster, CO
    Posts
    3,942

    Default

    Quote Originally Posted by crays View Post
    Actually, though, it would be easy enough for some internet savvy folks to track down the principles
    Ask and ye shall receive. Only one address and name associated with any fillings of the company since they were formed in 2014

    Registered Agent
    Name Anthony W Gorden
    Street address 3379 Foxridge Drive, Colorado Springs, CO 80916, United States
    Mailing address 3379 Foxridge Drive, Colorado Springs, CO 80916, United States
    --J
    My Feedback

    Certified NRA Instructor, ask me about CCW classes

    "Praise be to our prophet, John Moses Browning, who hath bestowed upon us the new testament of shooting. Delivered unto us, his disciples, on 29 March 1911 A.D."



  7. #7
    The "Godfather" of COAR Great-Kazoo's Avatar
    Join Date
    Sep 2003
    Location
    Washboard Alley, AZ.
    Posts
    41,823

    Default

    Quote Originally Posted by crays View Post
    All jokes aside, this is no laughing matter.

    Sent from somewhere...
    Good thing they weren't offering group buys
    The Great Kazoo's Feedback

    Ask Yourself: What's more terrifying? Fear or the Frightened .

  8. #8
    Varmiteer whitewalrus's Avatar
    Join Date
    Sep 2009
    Location
    Colorado Springs
    Posts
    505

    Default

    Quote Originally Posted by ray1970 View Post
    As someone who makes a living fixing jacked up rifles maybe you should hope the guy sold a boat load of these things.
    Sounds like the customers would be better off to just go buy another one with all the issues noted on this one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •