
Originally Posted by
Irving
.26 gauge is what you're looking for, and it is by far the most common. Lower the number, thicker it is. In all of my roof inspections, ever, I've come across .29 gauge ONCE. Which is of note because .29 gauge is the default one of my insurance carriers wants to write claims and it practically doesn't even exist in the field. That all aside, .26 and .24 gauge will suit you well. For cutting, I just used a metal cutting blade on my circular saw. A sawzall will do it just fine, but you'll want to hold it down so it's not bouncing all over the place and cutting a straight line may be challenging. That goes the same with a jig saw. You can cut with tin snips, but you'll regret every second of it and the cuts won't look good either. For securing to the wood, you could pre-drill pilot holes and use whatever wood screw, but you'd be better off with self-taping sheet metal screws. Those are still course thread and will work fine in the wood. The more fasteners you use, the less strain on each fastener, but you don't need to make it look like a battleship.