Replace the whole unit. OR keep that as your retainer, use this between the door and that piece. I have a different plate setup and the seal was less than adequate. I picked up a roll (16') for my door. Then used the plate to secure the new gasket, using their hardware . works better than the original
https://www.homedepot.com/p/M-D-Buil...3749/100353454
OR just replace the entire unit, with something like this
You rarely find replacement gaskets for the original one that came from the mfg.
https://www.homedepot.com/p/M-D-Buil...7643/100167331






Reply With Quote
