Project to organize/maximize my safe

[dogcaller]

They do offer countersunk washers, at most hardware stores. W/out reading the tutorial i "think" what you might want to use are these finishing washers.
https://www.globalindustrial.com/p/f...a6047b74060bb1




If not, Wulf's suggestion is the way to go. Or go to the hardware store and browse

Those would be perfect if they were just bigger (OD).

[Great-Kazoo]

Those would be perfect if they were just bigger (OD).

They are offered in other sizes. I have the stock velcro and rod setup. I used a staple gun and some spray adhesive, to secure the velcro mats to the underside of the shelf. No issues, so far.

You're way over thinking what should be a simple project. ..

[dogcaller]

They are offered in other sizes. I have the stock velcro and rod setup. I used a staple gun and some spray adhesive, to secure the velcro mats to the underside of the shelf. No issues, so far.

You're way over thinking what should be a simple project. ..

I've been accused of that before--with reason! The thing is, I now have all of the supplies for the DIY project, and I'd like to complete it. What is the approximate OD on the factory "tops" you have?

[Ah Pook]

Those would be perfect if they were just bigger (OD).

They are made in bigger sizes.

The handgun hangers are made by other mfgs for less. Not really a high dollar concept.

Watching this thread to maximize my own safe needs.