I found my new upper

[Marlin]

No,, You can get a .50 BMG upper, just have to load them one at a time.. Hence, the bolt action...


ETA: Just looked at the pic,,, If you aren't focused on the twig in the upper right,, It almost looked like a commercial airliner trailing smoke.

Nice setup btw...

[Irving]

Sorry, I was pretty confused.

[BPTactical]

I think Bohica out of Florida has a 50BMG upper for an AR

[Phillygunner]

I think Bohica out of Florida has a 50BMG upper for an AR

Bohica is not out of Florida. Serbu is based in Florida. Bohica was based in Minnesota at one time, but has relocated their operations to Arizona. The product is a very good quality product. If you purchase a Bohica 50 BMG upper, you will need to tweak some other parts. In order to get the best function, you will need to replace your hammer with a heavy hammer and heavy hammer spring. This is the minimum requirement. You will also need to remove the bolt release mechanism from your lower.

Good luck and enjoy. It is a serious blast... only a little pun intended. The muzzle break is efficient, but don't let anyone tell you the muzzle break makes it shoot like a small rifle. It feels like a BIG ASS 50 BMG and you won't want to shoot it all day long.

[TeleBlaster]

This is Mike from Zel Custom Mfg. We make the Tactilite line of big-bore uppers for the AR-15. We're a couple of guys out of Colorado that bought the old Ligamec machines, down in Tampa, FL. The shop is still down there, but we've got some units up here that you can check out if you're interested in coming up to the Eagle Valley Gun Club in Gypsum.

[TeleBlaster]

Jensen's has one on order that should be shipped to them in mid-Jan.

[glucas]

This is Mike from Zel Custom Mfg. We make the Tactilite line of big-bore uppers for the AR-15. We're a couple of guys out of Colorado that bought the old Ligamec machines, down in Tampa, FL. The shop is still down there, but we've got some units up here that you can check out if you're interested in coming up to the Eagle Valley Gun Club in Gypsum.

I would certainly volunteer to take one as a demo so I could share my unbiased opinion of how great this upper is with the rest of the forum.

[two shoes]

This is Mike from Zel Custom Mfg. We make the Tactilite line of big-bore uppers for the AR-15. We're a couple of guys out of Colorado that bought the old Ligamec machines, down in Tampa, FL. The shop is still down there, but we've got some units up here that you can check out if you're interested in coming up to the Eagle Valley Gun Club in Gypsum.

Website?

[TeleBlaster]

Website: www.tactilite.com

If there's interest, I can see what I can do about setting up a "Demo Day", in the spring.