Finishing a Lower

[powerstroke79]

Used Duracoat aerosol.






Stripped frame and slide. Use break cleaner, 90% alcohol and scotch pad to clean parts. Taped off part I didnt want coated. Website said 2-4 fire arms, not sure where they are getting that from. I did 4 light coat on all 3 pieces and the can was empty. Flashed off with heat gun between coats. I did have a blemish. I waited to long to remove the tape and had some coating peel with the tape. Luckly had a small amount in the can to touch up. Time will tell if it will hold up.