Close
Results 1 to 10 of 47

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-10-2023, 20:41 #11
    Wulf202
    Wulf202 is offline
    Grand Master Know It All
    Join Date
    Mar 2006
    Location
    Dickshooter, ID
    Posts
    4,828

    Default

    Quote Originally Posted by bellavite1 View Post
    I just put back the old pressure switch and it fired up.
    Will probably work for a few days and then we'll have issues again...
    I guess the board is the next thing?
    Hopefully I can return the switch and put it toward a control board.
    The line to the pressure switch goes to the fan. Inside that little barbed fitting can gather debris. Clean it with a paper clip. Then blast it with canned air if you have it.

    Check the hose for pin holes plug one end and blow on it. You can also cycle the pressure switch and check its continuity.
    Last edited by Wulf202; 01-10-2023 at 20:42.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules