Want to help me clean some old guns?

[Irving]

My grandfather was showing me some older guns he has, and I offered to clean them for him. I've got newer pistols that I just spray down with oil, scrub them, then wipe them off. I'd like some advice on the best products and methods to clean the guns I'm going to describe for you.

So now I have an M1911 A1, an Auto Ejecting 32 S & W CTGE (Harrington and Richardson), and a Winchester Model 1890 pump action 22 short rifle. I'm working on pictures. The 1911 and the Winchester look like they've been rode hard and put away wet for a long time.

The Winchester looks like it'd clean up nice, but I have no idea what to do with the wood and am which product I shoud use for the rest. I'm not going to refinish anything, just want to clean it. I looked up some stuff on the rifle and it definitely says it is a 22 short. It is the third model receiver, and is either a 1908 or a 1910. I don't know if the serial number is the number on the bottom of the receiver, or the bottom of the trigger guard. This gun has different numbers, perhaps they are supposed to match and this had a part replaced. I used this link: http://twoponies.home.mindspring.com...ifferences.htm
Here are the pictures.








The 1911 is all banged up and the finish is really wearing off, but there isn't really any rust on it. I looked on youtube to figure out how to take it down. I've never even so much as shot a 1911 before, just handled them in stores. Take down took me a minute to figure out, but wasn't too bad. I plan to at least take off the grips (carefully as I'm pretty sure they're original), but since it's not my gun, I'm not sure how much more I feel comfortable breaking it down. Some advice on that would be nice. EDIT: According to what I can find on this one, it was made in 1944 as the serial number is in this range: Colt: S/N 1,609,529 to 1,743,846 = 1944
Here is a picture of it. This thing looks like it was pulled out of the bottom of a lake! Everything seems to run pretty smooth on it though.


The 32 auto ejecting S&W is super shiney with some surface rust on the corners. This one seems like I can clean it normally without too much worry, the barrel is pretty gunked up though. Oh yeah, this one has an old leather holster that needs to be re-sewn. He suggested taking it to a shoe repair shop (on his dime) and having them do it. I told him that I'd look into it, but I thought that there was someone on here who made his own leather holsters.
Here are some pictures of this guy, including the holster I'd like to get repaired.








Also, if anyone can point me to some resources where I can look up the numbers on the guns to get a better idea exactly when they were made. I'm working on some pictures. Sorry for the crap pictures. I bought my lady a nice camera, but she took it back and exchanged it for a much crappier one that was easier to use!

Thanks!

[Batteriesnare]

I wouldn't clean them, they loose value quickly, especially if not done properly.

[Irving]

I'm not sure they are worth anything, especially the 1911. I should at least be able to clean the inside of the barrel though right?

EDIT: Now I feel dumb. Here I told him that I wanted to clean them up for him and he told me to knock myself out. He's not a gun collector or anything, but now I feel silly.

[earplug]

They look fine. There old guns and your wouldn't do Botox on Grandma.
Ask what Grandpa used and do as he did.
I wouldn't go much farther then CLP and a toothbrush and a bore brush.

[Marlin]

As far as the 1911, yep,, just the CLP.. Piece of history there..

Depending on how far you wanted to go on the other two.. Murphy's oil soap for the wood.. Used it on my Dad's .22, Removed, at the time 60 years worth of grime.. Didn't bother me,, it has no value to anybody but me.. So I cleaned it up and refinished it.. I might end up giving it to my great-nephew one of these days..

On the revolver,, CLP and then maybe some Flitz to polish it up..

[Irving]

Thanks guys.