Carbine vs Mid-length 16"

[tmckay2]

isnt the biggest difference with gas lengths the ejection angle? i thought the only big difference was carbine length tends to eject forwardish. other than that, id say whatever front set you plan to use should be the determining factor

[rhineoshott]

isnt the biggest difference with gas lengths the ejection angle? i thought the only big difference was carbine length tends to eject forwardish. other than that, id say whatever front set you plan to use should be the determining factor

How does a forend effect ejection?

[tmckay2]

it doesn't but it can effect the type of gas length. some fore ends have specific lengths of gas systems required. i ran into this when getting a new front set. the ejection pattern was a different issue. i will say though, if you shoot left handed and don't want to buy a left handed upper, carbine is better. well, usually anyways

[Graves]

I thought the car will cycle the bcg faster thus the need for m4 ramps.

[iamhunter]

Well the carbine length gas system is intended for carbine length (14.5 inch) barrels.

The mid-length gas system supposedly generates 50% the gas port pressure and 75% as much bolt pressure as a carbine length system on a 16" barrel.

the theory is that the mid-length gas-system will produce increased longevity in your barrel's life... Probably a non-issue for me....

Supposedly the mid-length also produces greater accuracy as well as less recoil.

The longer site radius would be nice as well.

However, I have little experience in the mid-length vs carbine category so I came here for input. Anyone have any experience with what I mentioned above?

[Graves]

Seems like you have all the input you need lol.

[iamhunter]

Seems like you have all the input you need lol.

Well I have internet facts. but I've always preferred REAL experience.

So if anyone could provide me some I'd be much appreciated.

haha.

[gnihcraes]

If it helps, I have a mid length and it seems to be harder to find hand guards and rails for it... not impossible, but a little more difficult. Everyone at the gun show has parts for the carbine models... maybe everyone has a mid-length and they are always sold out of parts...

my 2 cents...