Cartridge Collection

[JohnnyDrama]

Happy Friday Y'all

My cartridge collection has outgrown the display case. Here's an older pic of what I currently have going on.



The collection started as a few random cartridges I picked up at the range. Then I started acquiring interesting cartridges from shooters I'd meet while helping at the club hunter sight in. The "collection" got a boost when I inherited a bunch of cartridges unceremoniously dumped in an oatmeal tube from an uncle. About this time, I decided I needed to reorganize the way I had the cartridges displayed and arrange them more by caliber than use/origin (I had a .50 BMG on the second row). Anyway, now the display "case" is about full.

I've considered a couple option. One is to dismantle the shelves inside what I currently have and make a little more room. I think I could add another shelf and still have room for a .50 a the top. Another option would be to build another display from scratch. The one I am using began life as a cabinet door I put together out of scrap material to close off some space when my daughter was beginning to crawl.

I'm looking for suggestions and ideas. What do you guys think would look good? Does anybody else have something similar? I've looked online a little and didn't see anything that appealed to me. I'd like something a little bigger, I have a half dozen or so cartridges to add, and I add two or three a year (although that may have slowed...).

Thanks

[eddiememphis]

I don't see a .375 H&H.

Or a .25 ACP. Or a loaded .44 Magnum or .45 Colt. I could give you those.

[O2HeN2]

I can supply a .41 Magnum and a .44 Special if you're interested.

O2

[10x]

Add a shelf, if possible. Might be a good winter project.

[Wulf202]

I've got a couple you don't have if it's easy to mail them send me your address.

[SAnd]

I used some of the rigid foam insulation. I cut grooves in the foam with half round router bits. Used a 1 inch deep shadow box frame.

Maybe you can enlarge on that idea.

[Erni]

If I CAD it up one of the members can print 3D print you nice frames. ???

[eddiememphis]

I used some of the rigid foam insulation. I cut grooves in the foam with half round router bits. Used a 1 inch deep shadow box frame.

Maybe you can enlarge on that idea.

Shouldn't slot 38 have a 38 in it?

[TheNash]

Shouldn't slot 38 have a 38 in it?

They are the reference numbers and 38 says empty

[Wulf202]

Shouldn't slot 38 have a 38 in it?

Glock logic.