SD Card hub?

[Little Dutch]

I use SD cards quite frequently between the 3d printer and game cameras. My current PC doesn't have a usb card slot, and I am using thumb drive usb adapters. I would like to get an SD card hub that allows me to insert and remove SD cards without removing the USB drive itself. I want to insert the card, read or load data, eject the card as appropriate, and load a different card without having to re-insert the usb adapter.

I suspect my google searches are not using the correct terms. Any suggestions?

[Sawin]

Search for an SD card reader or adapter. If you really want a hub, look for a dock or something that has an SD card reader built into it.

this for example - https://www.amazon.com/WALNEW-Thunde...Y2hfYXRm&psc=1

[Osmosis]

If your PC is a desktop and you have a spare slot on the front then there are things like this you can get
https://www.amazon.com/Sabrent-Inter...0803f57c45292b

[Walker2970]

4 sd cards at once
https://www.amazon.com/XtremPro-Mult...9596396&sr=8-5

[Sawin]

4 sd cards at once
https://www.amazon.com/XtremPro-Mult...9596396&sr=8-5

Hahaha Mo Betta!

[flogger]

i picked one up at office depot a while back, has 4 different side slots.

[bradbn4]

The trick with the PC mounted options you need to verify that you have a spare interface (often USB) to hook it up.
I opted on my last computer build to dump that device for an extended USB cable + a simple USB based card reader/writer.

I have a few Anker USB 3.0 SD Card Reader, 2-in-1 SD Card Readers and they seem to work well.

With the extended USB cable it made it easy to access the device to swap out memory cards. I could always keep the
card reader installed....

another option is https://www.amazon.com/SABRENT-Multi...st_sto_dp&th=1

[brutal]

For a desktop 3.5" bay install, I have this one and it's great with the high speed USB-C and SD card readers.

But, yes it does require plugging into the mainboard headers. I just have an older low end MSI MB.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

My mid-tower PC hangs off the end of my DeskHaus just below the top so it's handy to use the slots.