Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 96

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Stircrazy Jer jerrymrc's Avatar
    Join Date
    Jan 2004
    Location
    Colorado Springs
    Posts
    8,166

    Default

    Quote Originally Posted by offgrid View Post
    Yes, wind turbine and PV is tied together charging the same batteries. The wind turbine I purchased is a Proven WT2.5. It is on a 70' freestanding tower. Picked the the Proven for it's reputation of surviving harsh wind sites. I have a harsh wind site. Last January had a peak gust of 102.6 mph. The turbines peak output is 2800 watts @ 30 mph. Last January with a average wind speed of 15.6 it produced 636 KW hours. The cost, 18K doing all the work myself.

    PV consist of 2200 watts of panels.

    Between the PV and the wind, it produces more than enough to cover our loads. Also have 12KW propane generator for a backup.
    Welcome to the forums. That's a lot of power. 24V I take it? how many AH of storage do you have?
    I see you running, tell me what your running from

    Nobody's coming, what ya do that was so wrong.

  2. #2
    Scotty Hit It...
    Join Date
    Jan 2010
    Location
    Idaho Springs
    Posts
    260

    Default

    48 volt system. The advantage to 48 over 24 is lower current, smaller gauge wire $, single series string of batteries.

    1180 AH battery bank, 24-2volt cells. A nominal 50V's x 1180 = 59, 000 watts capacity. We use about 8 KW's a day. Battery bank gives us 3 day storage discharging down to 50%. Very rare to go 3 days w/o sun or wind.

  3. #3
    Varmiteer Seamonkey's Avatar
    Join Date
    Feb 2010
    Location
    Kiowa
    Posts
    501

    Default

    This thread and another one got me thinking about a solar unit to charge batteries for power tools.
    If the SHTF and your house is damaged power tools would let you fix your house up faster. Being able to charge the batteries for the tools off a solar powered battery system seems like a logical step to me.
    Could the same set up be used for recharging cell phones, flashlights and AA or AAA batteries?

  4. #4
    Scotty Hit It...
    Join Date
    Jan 2010
    Location
    Idaho Springs
    Posts
    260

    Default

    A small solar setup will absolutely work for charging you cordless tool batteries.

    Get yourself a 100 watt panel, 12 volt charge controller, 150 AH battery, and a Pure Wave Sign inverter.

    You can not use a modified sine-wave inverter. There is a high probability your battery chargers will not work or worse burn up your chargers.

    You can start small with just a solar panel, charge controller and battery. Run a few lights in your house. You can get 12V lights at most RV/camper stores. You can use a 12V light in any standard lamp.

  5. #5
    paulmartin483
    Guest

    Default

    Yups I am also trying to design a solar power battery charger that won't overcharge batteries. I've worked out how to make a basic solar charger with solar panel, blocking diode, voltage regular, battery, but I can't figure out how to prevent the batteries from overcharging if I leave them out. I was thinking that an NPN transistor might be useful as a switch, but I don't know where to start.Any suggestions.

  6. #6
    Scotty Hit It...
    Join Date
    Jan 2010
    Location
    Idaho Springs
    Posts
    260

    Default

    Quote Originally Posted by paulmartin483 View Post
    Yups I am also trying to design a solar power battery charger that won't overcharge batteries. I've worked out how to make a basic solar charger with solar panel, blocking diode, voltage regular, battery, but I can't figure out how to prevent the batteries from overcharging if I leave them out. I was thinking that an NPN transistor might be useful as a switch, but I don't know where to start.Any suggestions.
    Suggest a Morningstar TS45 or a Xantrex C40 charge controller. These monitor the battery voltage/charge, no worries about overcharging. If you are wanting to build a charge controller, check out www.otherpower.com forum, I'm sure you can find a schematic for one. Hugh Piggot, a well know small wind turbine designer posts over there. Or google Hugh Piggot.

    What do you have for panel(s), batteries? Voltage?

    The link you provided, do you work for that company? Do you have a Southwest wind turbine?

  7. #7
    Stircrazy Jer jerrymrc's Avatar
    Join Date
    Jan 2004
    Location
    Colorado Springs
    Posts
    8,166

    Default

    Quote Originally Posted by offgrid View Post
    Suggest a Morningstar TS45 or a Xantrex C40 charge controller. These monitor the battery voltage/charge, no worries about overcharging. If you are wanting to build a charge controller, check out www.otherpower.com forum, I'm sure you can find a schematic for one. Hugh Piggot, a well know small wind turbine designer posts over there. Or google Hugh Piggot.

    What do you have for panel(s), batteries? Voltage?

    The link you provided, do you work for that company? Do you have a Southwest wind turbine?
    I do like the article here. http://www.otherpower.com/popup.html This is exactly how I learned. I used to camp for 5-7 days at a time up at the Buffalo Creek range. This is how through trial and error exactly what and how was needed. Even though I have worked the electronics field for 30 years now it was fun and challenging to learn something new. This led to my LED trials and other projects.

    I do need to find another place to camp in the middle of nowhere.
    I see you running, tell me what your running from

    Nobody's coming, what ya do that was so wrong.

  8. #8
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    I got my own ideas for getting off the grid. About $5,000 will fix all my electric and car needs.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  9. #9
    mangyhyena
    Guest

    Default

    Quote Originally Posted by DOC View Post
    I got my own ideas for getting off the grid. About $5,000 will fix all my electric and car needs.

    Wood gas? I priced them out at around $5K and they'll make electricity or run a vehicle. Do I get 5 points for a right answer or the big buzzer for being off base?
    If I'm right, have you checked into storing wood gas in pressurized tanks? Someone is doing that right now. Don't know how safe that is, but it's being done. That would allow you to build up a store of fuel ahead of time and it would allow you to run your vehicle without pulling a gasifier along for the ride on a trailer.

  10. #10
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    Its the buzzer sorry. Wood gas sounds very interesting indeed. If done with the right wood one could smoke a brisket while making fuel for their car.
    Mine idea is an engine idea that I've been kicking around since 1999 or so. I've tried it once but haven't committed to finishing it yet. The idea of pissing off the OPEC because we wouldn't need their oil anymore is what I see happening and its a double edged sword. And it wouldn't require a change in lifestyle so I think it would catch on with everyone after a while.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •